UART6 is used for debug (routed via uSD pins) and UART9 is connected
to the bluetooth chip.
Set indexed aliases to make the GENI UART driver happy and route serial
traffic through the debug uart by default.
Fixes: 30a7f99befc6 ("arm64: dts: qcom: Add support for SONY Xperia XZ2 / XZ2C / XZ3 (Tama platform)")
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
index 3bc187a066ae..7ee61b20452e 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
@@ -15,6 +15,15 @@ / {
qcom,msm-id = <321 0x20001>; /* SDM845 v2.1 */
qcom,board-id = <8 0>;
+ aliases {
+ serial0 = &uart6;
+ serial1 = &uart9;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
gpio-keys {
compatible = "gpio-keys";
---
base-commit: 53cdf865f90ba922a854c65ed05b519f9d728424
change-id: 20230627-topic-tama_uart-bacfeac1d0e9
Best regards,
--
Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
