Hi Prabhakar,
Sorry, there are still a few items that need to be fixed.
If you can make a v4 with these issues addressed, then I can still make a
pull request, although it depends on Mauro whether it is still accepted for
3.19.
On 12/04/2014 12:12 AM, Lad, Prabhakar wrote:
> From: Benoit Parrot <bparrot@xxxxxx>
>
> This patch adds Video Processing Front End (VPFE) driver for
> AM437X family of devices
> Driver supports the following:
> - V4L2 API using MMAP buffer access based on videobuf2 api
> - Asynchronous sensor/decoder sub device registration
> - DT support
Just to confirm: this driver only supports SDTV formats? No HDTV?
I didn't see any VIDIOC_*_DV_TIMINGS support, so I assume it really
isn't supported.
>
> Signed-off-by: Benoit Parrot <bparrot@xxxxxx>
> Signed-off-by: Darren Etheridge <detheridge@xxxxxx>
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx>
> ---
<snip>
> diff --git a/drivers/media/platform/am437x/am437x-vpfe.c b/drivers/media/platform/am437x/am437x-vpfe.c
> new file mode 100644
> index 0000000..25863e8
> --- /dev/null
> +++ b/drivers/media/platform/am437x/am437x-vpfe.c
<snip>
> +
> +static int
> +cmp_v4l2_format(const struct v4l2_format *lhs, const struct v4l2_format *rhs)
> +{
> + return lhs->type == rhs->type &&
> + lhs->fmt.pix.width == rhs->fmt.pix.width &&
> + lhs->fmt.pix.height == rhs->fmt.pix.height &&
> + lhs->fmt.pix.pixelformat == rhs->fmt.pix.pixelformat &&
> + lhs->fmt.pix.field == rhs->fmt.pix.field &&
> + lhs->fmt.pix.colorspace == rhs->fmt.pix.colorspace;
Add a check for pix.ycbcr_enc and pix.quantization.
<snip>
> +/*
> + * vpfe_release : This function is based on the vb2_fop_release
> + * helper function.
> + * It has been augmented to handle module power management,
> + * by disabling/enabling h/w module fcntl clock when necessary.
> + */
> +static int vpfe_release(struct file *file)
> +{
> + struct vpfe_device *vpfe = video_drvdata(file);
> + int ret;
> +
> + vpfe_dbg(2, vpfe, "vpfe_release\n");
> +
> + ret = _vb2_fop_release(file, NULL);
This isn't going to work. _vb2_fop_release calls v4l2_fh_release(), so
the v4l2_fh_is_singular_file(file) will be wrong and you release the fh
once too many.
I would do this:
if (!v4l2_fh_is_singular_file(file))
return vb2_fop_release(file);
mutex_lock(&vpfe->lock);
ret = _vb2_fop_release(file, NULL);
vpfe_ccdc_close(&vpfe->ccdc, vpfe->pdev);
mutex_unlock(&vpfe->lock);
return ret;
> +
> + if (v4l2_fh_is_singular_file(file)) {
> + mutex_lock(&vpfe->lock);
> + vpfe_ccdc_close(&vpfe->ccdc, vpfe->pdev);
> + v4l2_fh_release(file);
> + mutex_unlock(&vpfe->lock);
> + }
> +
> + return ret;
> +}
<snip>
> +static int vpfe_enum_size(struct file *file, void *priv,
> + struct v4l2_frmsizeenum *fsize)
> +{
> + struct vpfe_device *vpfe = video_drvdata(file);
> + struct v4l2_subdev_frame_size_enum fse;
> + struct vpfe_subdev_info *sdinfo;
> + struct v4l2_mbus_framefmt mbus;
> + struct v4l2_pix_format pix;
> + struct vpfe_fmt *fmt;
> + int ret;
> +
> + vpfe_dbg(2, vpfe, "vpfe_enum_size\n");
> +
> + /* check for valid format */
> + fmt = find_format_by_pix(fsize->pixel_format);
> + if (!fmt) {
> + vpfe_dbg(3, vpfe, "Invalid pixel code: %x, default used instead\n",
> + fsize->pixel_format);
> + return -EINVAL;
> + }
> +
> + memset(fsize->reserved, 0x0, sizeof(fsize->reserved));
> +
> + sdinfo = vpfe->current_subdev;
> + if (!sdinfo->sd)
> + return -EINVAL;
> +
> + memset(&pix, 0x0, sizeof(pix));
> + /* Construct pix from parameter and use default for the rest */
> + pix.pixelformat = fsize->pixel_format;
> + pix.width = 640;
> + pix.height = 480;
> + pix.colorspace = V4L2_COLORSPACE_SRGB;
> + pix.field = V4L2_FIELD_NONE;
> + pix_to_mbus(vpfe, &pix, &mbus);
> +
> + memset(&fse, 0x0, sizeof(fse));
> + fse.index = fsize->index;
> + fse.pad = 0;
> + fse.code = mbus.code;
> + ret = v4l2_subdev_call(sdinfo->sd, pad, enum_frame_size, NULL, &fse);
FYI: strictly speaking this is wrong since this op theoretically expects a
v4l2_subdev_fh pointer instead of a NULL argument. However, you do not have
an alternative right now. As you know, I've been working on fixing this, so
if that gets accepted, then you need to update this code as well in a later
patch.
> + if (ret)
> + return -EINVAL;
> +
> + vpfe_dbg(1, vpfe, "vpfe_enum_size: index: %d code: %x W:[%d,%d] H:[%d,%d]\n",
> + fse.index, fse.code, fse.min_width, fse.max_width,
> + fse.min_height, fse.max_height);
> +
> + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
> + fsize->discrete.width = fse.max_width;
> + fsize->discrete.height = fse.max_height;
> +
> + vpfe_dbg(1, vpfe, "vpfe_enum_size: index: %d pixformat: %s size: %dx%d\n",
> + fsize->index, print_fourcc(fsize->pixel_format),
> + fsize->discrete.width, fsize->discrete.height);
> +
> + return 0;
> +}
> +
<snip>
> +static int
> +vpfe_g_selection(struct file *file, void *fh, struct v4l2_selection *s)
> +{
> + struct vpfe_device *vpfe = video_drvdata(file);
> +
> + switch (s->target) {
> + case V4L2_SEL_TGT_COMPOSE_DEFAULT:
> + case V4L2_SEL_TGT_COMPOSE_BOUNDS:
These two COMPOSE cases should be dropped, since there is no compose support!
> + case V4L2_SEL_TGT_CROP_BOUNDS:
> + case V4L2_SEL_TGT_CROP_DEFAULT:
> + s->r.left = s->r.top = 0;
> + s->r.width = vpfe->crop.width;
> + s->r.height = vpfe->crop.height;
> + break;
> +
> + case V4L2_SEL_TGT_CROP:
> + s->r = vpfe->crop;
> + break;
> +
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
<snip>
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
