Re: [PATCH v3 1/3] dt-bindings: qspi: cdns,qspi-nor: Add clocks for StarFive JH7110 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2023/6/21 16:10, Krzysztof Kozlowski wrote:
> On 21/06/2023 08:45, William Qiu wrote:
>> 
>> 
>> On 2023/6/19 20:17, Krzysztof Kozlowski wrote:
>>> On 19/06/2023 10:35, William Qiu wrote:
>>>> The QSPI controller needs three clock items to work properly on StarFive
>>>> JH7110 SoC, so there is need to change the maxItems's value to 3. Other
>>>> platforms do not have this constraint.
>>>>
>>>> Signed-off-by: William Qiu <william.qiu@xxxxxxxxxxxxxxxx>
>>>> Reviewed-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
>>>> Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
>>>> ---
>>>>  .../bindings/spi/cdns,qspi-nor.yaml           | 20 ++++++++++++++++++-
>>>>  1 file changed, 19 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
>>>> index b310069762dd..1b83cbb9a086 100644
>>>> --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
>>>> +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
>>>> @@ -26,6 +26,15 @@ allOf:
>>>>              const: starfive,jh7110-qspi
>>>>      then:
>>>>        properties:
>>>> +        clocks:
>>>> +          maxItems: 3
>>>> +
>>>> +        clock-names:
>>>> +          items:
>>>> +            - const: ref
>>>> +            - const: ahb
>>>> +            - const: apb
>>>
>>> You are duplicating top-level property. Define the items only in one
>>> place. If this list is applicable to everything, then in top-level property.
>>>
>> Only in JH7110 SoC need there clocks, other platforms do not have this constraint.
>> So I need to duplicating top-level property.
> 
> You don't need, why? Why writing something twice is an answer to "JH7110
> needs 3 clocks"? It's not related.
> 
> What is the clock for all other variants?
> 
I'll try to not duplicating top-level property.
>>>> +
>>>>          resets:
>>>>            minItems: 2
>>>>            maxItems: 3
>>>> @@ -38,6 +47,9 @@ allOf:
>>>>  
>>>>      else:
>>>>        properties:
>>>> +        clocks:
>>>> +          maxItems: 1
>>>
>>> clock-names is missing. They must be in sync with clocks. What is the
>>> first clock?
>>>
>> But there are no clock-names before, should I add it?
> 
> Then let's just disallow it. Either you define it or you not allow it.
> 
Fine, I'll keep it disallow.
>>>> +
>>>>          resets:
>>>>            maxItems: 2
>>>>  
>>>> @@ -70,7 +82,13 @@ properties:
>>>>      maxItems: 1
>>>>  
>>>>    clocks:
>>>> -    maxItems: 1
>>>> +    maxItems: 3
>>>
>>>
>>> You did not test it before sending. minItems is missing.
>>>
>> I will add it.
>> As for other platforms, should I use enum to constraint the clocks?
> 
> What is the clock on other platforms?
> 
Other platforms have only one clock.
> Best regards,
> Krzysztof
> 
Thanks for taking time to review this patch series and give usefull
suggestions.

Best Regards,
William



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux