On Montag, 26. Juni 2023 22:00:25 CEST Konrad Dybcio wrote:
> Add the missing short interrupt. This fixes the schema warning:
>
> wled@d800: interrupt-names: ['ovp'] is too short
>
> Fixes: fe508ced49dd ("arm64: dts: qcom: pm6150l: Add wled node")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/pm6150l.dtsi | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi
> b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index 6a7fe1e59f15..d13a1ab7c20b
> 100644
> --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
> @@ -121,8 +121,9 @@ pm6150l_flash: led-controller@d300 {
> pm6150l_wled: leds@d800 {
> compatible = "qcom,pm6150l-wled";
> reg = <0xd800>, <0xd900>;
> - interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>;
> - interrupt-names = "ovp";
> + interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
> + <0x5 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "ovp", "short";
Are you sure this interrupt really exists? It's not a thing used downstream at
least:
https://android.googlesource.com/kernel/msm-extra/devicetree/+/refs/heads/android-msm-bramble-4.19-android11-qpr1/qcom/pm6150l.dtsi#293
Regards
Luca
> label = "backlight";
>
> status = "disabled";
