On 25.06.2023 22:25, Dmitry Baryshkov wrote:
> The SAW2 device should describe the regulator constraints rather than
> just declaring that it has the regulator.
>
> Drop the 'regulator' property. If/when CPU voltage scaling is
> implemented for this platform, proper regulator nodes show be added
> instead.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
> arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi | 5 -----
> 1 file changed, 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
> index f0ef86fadc9d..ad3c922843c7 100644
> --- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
> +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
> @@ -350,31 +350,26 @@ acc3: power-manager@b0b8000 {
> saw0: regulator@b089000 {
> compatible = "qcom,saw2";
> reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
> - regulator;
> };
>
> saw1: regulator@b099000 {
> compatible = "qcom,saw2";
> reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
> - regulator;
> };
>
> saw2: regulator@b0a9000 {
> compatible = "qcom,saw2";
> reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
> - regulator;
> };
>
> saw3: regulator@b0b9000 {
> compatible = "qcom,saw2";
> reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
> - regulator;
> };
>
> saw_l2: regulator@b012000 {
> compatible = "qcom,saw2";
> reg = <0xb012000 0x1000>;
> - regulator;
> };
>
> blsp1_uart1: serial@78af000 {
