Re: [PATCH 1/9] dt-bindings: mfd: Add bindings for SAM9X7 LCD controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 21/06/23 13:17, Nicolas Ferre wrote:
> On 16/06/2023 at 08:44, Manikandan M - I67131 wrote:
>> On 14/06/23 20:10, Nicolas Ferre wrote:
>>> On 13/06/2023 at 20:21, Conor Dooley wrote:
>>>> On Tue, Jun 13, 2023 at 08:17:13PM +0200, Krzysztof Kozlowski wrote:
>>>>> On 13/06/2023 09:04, Manikandan Muralidharan wrote:
>>>>>> Add new compatible string for the XLCD controller on SAM9X7 SoC.
>>>>>>
>>>>>> Signed-off-by: Manikandan Muralidharan<manikandan.m@xxxxxxxxxxxxx>
>>>>>> ---
>>>>>>    Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt | 1 +
>>>>>>    1 file changed, 1 insertion(+)
>>>>>>
>>>>>> diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
>>>>>> b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
>>>>>> index 5f8880cc757e..7c77b6bf4adb 100644
>>>>>> --- a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
>>>>>> +++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
>>>>>> @@ -8,6 +8,7 @@ Required properties:
>>>>>>       "atmel,sama5d3-hlcdc"
>>>>>>       "atmel,sama5d4-hlcdc"
>>>>>>       "microchip,sam9x60-hlcdc"
>>>>>> +   "microchip,sam9x7-xlcdc"
>>>>> Google says sam9x7 is a series, not a SoC. Please add compatibles for
>>>>> specific SoCs, not for series.
>>>> We had this one a few weeks ago, see
>>>> https://lore.kernel.org/all/add5e49e-8416-ba9f-819a-da944938c05f@xxxxxxxxxxxxx/
>>>> and its parents. Outcome of that seemed to be that using "sam9x7" was
>>>> fine.
>>>
>>> And it's where it begins to be funny, as the LCD is precisely one aspect
>>> where we differentiate between sam9x75, sam9x72 and sam9x70...
>>> So please Manikandan sort this out if difference between these chips
>>> will be better handled with different compatibility string, in
>>> particular about //, LVDS and MIPI-DSI variants!
>> Yes Sure, I will replace the compatible as s/sam9x7/sam9x75/g to handle
>> the different variants of sam9x7 better.
> 
> Moving to sam9x75 is probably good. But what is your plan for 
> differentiating parallel and LVDS (on sam9x72) and precisely this 
> sam9x75 variant which in addition has MIPI-DSI?
In sam9x75 with support for LVDS and MIPI, Parallel interfacing 
peripherals, the additions performed on the LCD controller driver is the 
same.Considering the LCDC IP used in sam9x75, there are no registers 
sets that needs modification per connecting peripheral variants, only 
the clock and DRM_ENCODER_MODE_XXX (set by connecting peripheral driver) 
differs, which can be handled in DT, atmel-lcdc MFD driver and 
peripheral driver.

In future, sam9x72 with XLCD controller can be differentiated with 
sam9x72 compatible string and with a IP version flag(is_xlcdc_v2) in its 
driver data if an upgraded XLCD IP is used with difference in bits or 
register set exist compared to current IP.
> 
> Regards,
>   Nicolas
> 
> 

-- 
Thanks and Regards,
Manikandan M.





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux