Re: [PATCH v5 4/4] arm64: dts: meson-t7-a311d2-khadas-vim4: add initial device-tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The Khadas VIM4 uses the Amlogic A311D2 SoC, based on the Amlogic T7 SoC
family, on a board with the same form factor as the VIM3 models.

- 8GB LPDDR4X 2016MHz
- 32GB eMMC 5.1 storage
- 32MB SPI flash
- 10/100/1000 Base-T Ethernet
- AP6275S Wireless (802.11 a/b/g/n/ac/ax, BT5.1)
- HDMI 2.1 video
- HDMI Input
- 1x USB 2.0 + 1x USB 3.0 ports
- 1x USB-C (power) with USB 2.0 OTG
- 3x LED's (1x red, 1x blue, 1x white)
- 3x buttons (power, function, reset)
- M2 socket with PCIe, USB, ADC & I2C
- 40pin GPIO Header
- 1x micro SD card slot

Signed-off-by: Lucas Tanure <tanure@xxxxxxxxx>
---
  arch/arm64/boot/dts/amlogic/Makefile          |   1 +
  .../amlogic/meson-t7-a311d2-khadas-vim4.dts   |  52 ++++++

Please rename "meson-t7-a311d2-khadas-vim4.dts" to "amlogic-t7-a311d2-khadas-vim4.dts".

  arch/arm64/boot/dts/amlogic/meson-t7.dtsi     | 158 ++++++++++++++++++

Please rename "meson-t7.dtsi" to "amlogic-t7.dtsi".

  3 files changed, 211 insertions(+)
  create mode 100644 arch/arm64/boot/dts/amlogic/meson-t7-a311d2-khadas-vim4.dts
  create mode 100644 arch/arm64/boot/dts/amlogic/meson-t7.dtsi

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index cd1c5b04890a..1c5846bd1ca0 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -74,3 +74,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-t7-a311d2-khadas-vim4.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-t7-a311d2-khadas-vim4.dts b/arch/arm64/boot/dts/amlogic/meson-t7-a311d2-khadas-vim4.dts
new file mode 100644
index 000000000000..04cc8b0dfd8c
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-t7-a311d2-khadas-vim4.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Wesion, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-t7.dtsi"
+
+/ {
+       model = "Khadas vim4";
+       compatible = "khadas,vim4", "amlogic,a311d2", "amlogic,t7";
+
+       aliases {
+               serial0 = &uart_A;
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x0 0x2 0x0>; /* 8 GB */
+       };
+
+       reserved-memory {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               ranges;
+
+               /* 3 MiB reserved for ARM Trusted Firmware (BL31) */
+               secmon_reserved: secmon@5000000 {
+                       reg = <0x0 0x05000000 0x0 0x300000>;
+                       no-map;
+               };
+
+               /* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+               secmon_reserved_bl32: secmon@5300000 {
+                       reg = <0x0 0x05300000 0x0 0x2000000>;
+                       no-map;
+               };
+       };
+
+       xtal: xtal-clk {
+               compatible = "fixed-clock";
+               clock-frequency = <24000000>;
+               clock-output-names = "xtal";
+               #clock-cells = <0>;
+       };
+
+};
+
+&uart_A {
+       status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-t7.dtsi b/arch/arm64/boot/dts/amlogic/meson-t7.dtsi
new file mode 100644
index 000000000000..9b8c33708ecd
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-t7.dtsi
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+       interrupt-parent = <&gic>;
+       #address-cells = <2>;
+       #size-cells = <2>;
+
+       cpus {
+               #address-cells = <0x2>;
+               #size-cells = <0x0>;
+
+               cpu-map {
+                       cluster0 {
+                               core0 {
+                                       cpu = <&cpu100>;
+                               };
+                               core1 {
+                                       cpu = <&cpu101>;
+                               };
+                               core2 {
+                                       cpu = <&cpu102>;
+                               };
+                               core3 {
+                                       cpu = <&cpu103>;
+                               };
+                       };
+
+                       cluster1 {
+                               core0 {
+                                       cpu = <&cpu0>;
+                               };
+                               core1 {
+                                       cpu = <&cpu1>;
+                               };
+                               core2 {
+                                       cpu = <&cpu2>;
+                               };
+                               core3 {
+                                       cpu = <&cpu3>;
+                               };
+                       };
+               };
+
+               cpu100: cpu@100 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a53";
+                       reg = <0x0 0x100>;
+                       enable-method = "psci";
+               };
+
+               cpu101: cpu@101{
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a53";
+                       reg = <0x0 0x101>;
+                       enable-method = "psci";
+               };
+
+               cpu102: cpu@102 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a53";
+                       reg = <0x0 0x102>;
+                       enable-method = "psci";
+               };
+
+               cpu103: cpu@103 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a53";
+                       reg = <0x0 0x103>;
+                       enable-method = "psci";
+               };
+
+               cpu0: cpu@0 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a73";
+                       reg = <0x0 0x0>;
+                       enable-method = "psci";
+               };
+
+               cpu1: cpu@1 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a73";
+                       reg = <0x0 0x1>;
+                       enable-method = "psci";
+               };
+
+               cpu2: cpu@2 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a73";
+                       reg = <0x0 0x2>;
+                       enable-method = "psci";
+               };
+
+               cpu3: cpu@3 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a73";
+                       reg = <0x0 0x3>;
+                       enable-method = "psci";
+               };
+       };
+
+       timer {
+               compatible = "arm,armv8-timer";
+               interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+       };
+
+       psci {
+               compatible = "arm,psci-1.0";
+               method = "smc";
+       };
+
+       sm: secure-monitor {
+               compatible = "amlogic,meson-gxbb-sm";
+       };
+
+       soc {
+               compatible = "simple-bus";
+               #address-cells = <2>;
+               #size-cells = <2>;
+               ranges;
+
+               gic: interrupt-controller@fff01000 {
+                       compatible = "arm,gic-400";
+                       #interrupt-cells = <3>;
+                       #address-cells = <0>;
+                       interrupt-controller;
+                       reg = <0x0 0xfff01000 0 0x1000>,
+                             <0x0 0xfff02000 0 0x0100>;
+                       interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+               };
+
+               apb4: bus@fe000000 {
+                       compatible = "simple-bus";
+                       reg = <0x0 0xfe000000 0x0 0x480000>;
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+                       uart_A: serial@78000 {
+                               compatible = "amlogic,meson-t7-uart",
+                                            "amlogic,meson-s4-uart";
+                               reg = <0x0 0x78000 0x0 0x18>;
+                               interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+                               status = "disabled";
+                               clocks = <&xtal>, <&xtal>, <&xtal>;
+                               clock-names = "xtal", "pclk", "baud";
+                       };
+               };
+
+       };
+};
--
2.41.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-amlogic



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux