On Fri, Jun 23, 2023 at 05:44:50PM +0100, Conor Dooley wrote: > On Fri, Jun 23, 2023 at 01:33:25PM +0200, Rasmus Villemoes wrote: > > Allow specifying the threshold for which the channels configured as > > digital input change state. > > > > Signed-off-by: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx> > > --- > > > > Running dt_binding_check on this with a too small or large value in > > the example does give me an error, but the multipleOf does not seem to > > be enforced; the value 1234567 is not flagged. I don't know if that's > > expected (maybe I have too old versions of something). > > That's one for Rob. I checked a few others and behaviour was the same > there. > > > .../devicetree/bindings/iio/addac/adi,ad74413r.yaml | 10 ++++++++++ > > 1 file changed, 10 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml > > index 590ea7936ad7..1f90ce3c7932 100644 > > --- a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml > > +++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml > > @@ -51,6 +51,14 @@ properties: > > Shunt (sense) resistor value in micro-Ohms. > > default: 100000000 > > > > + digital-input-threshold-microvolt: > > Should this not have an adi vendor prefix, similar to > "adi,digital-input-threshold-mode-fixed"? Yes. Rob
