Re: [PATCH v2 1/3] dt-bindings: pwm: Add binding for Allwinner D1/T113-S3/R329 PWM controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hey Alexksandr,

On Fri, Jun 23, 2023 at 05:59:59PM +0300, Aleksandr Shubin wrote:
> Allwinner's D1, T113-S3 and R329 SoCs have a new pwm
> controller witch is different from the previous pwm-sun4i.
> 
> The D1 and T113 are identical in terms of peripherals,
> they differ only in the architecture of the CPU core, and
> even share the majority of their DT. Because of that,
> using the same compatible makes sense.
> The R329 is a different SoC though, and should have
> a different compatible string added, especially as there
> is a difference in the number of channels.
> 
> D1 and T113s SoCs have one PWM controller with 8 channels.
> R329 SoC has two PWM controllers in both power domains, one of
> them has 9 channels (CPUX one) and the other has 6 (CPUS one).
> 
> Add a device tree binding for them.
> 
> Signed-off-by: Aleksandr Shubin <privatesub2@xxxxxxxxx>
> ---
>  .../bindings/pwm/allwinner,sun20i-pwm.yaml    | 83 +++++++++++++++++++
>  1 file changed, 83 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
> new file mode 100644
> index 000000000000..eec9d1dd67c2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
> @@ -0,0 +1,83 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pwm/allwinner,sun20i-pwm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Allwinner D1, T113-S3 and R329 PWM
> +
> +maintainers:
> +  - Aleksandr Shubin <privatesub2@xxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: allwinner,sun20i-d1-pwm
> +      - items:
> +          - const: allwinner,sun20i-r329-pwm
> +          - const: allwinner,sun20i-d1-pwm
> +
> +  reg:
> +    maxItems: 1
> +
> +  "#pwm-cells":
> +    const: 3
> +
> +  clocks:
> +    items:
> +      - description: 24 MHz oscillator
> +      - description: Bus Clock
> +
> +  clock-names:
> +    items:
> +      - const: hosc
> +      - const: bus
> +
> +  resets:
> +    maxItems: 1
> +    description: module reset
> +
> +allOf:
> +  - $ref: pwm.yaml#
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: allwinner,sun20i-r329-pwm
> +
> +    then:
> +      properties:
> +        allwinner,pwm-channels:
> +          $ref: /schemas/types.yaml#/definitions/uint32
> +          description: The number of PWM channels configured for this instance
> +          enum: [6, 9]

Last time I acked something like this, Krzysztof complained about
defining properties inside conditionals. This diff avoids the
definition in the conditional, while also disallowing it on the D1.
Thoughts?

diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
index eec9d1dd67c2..6c04aaa5e9ab 100644
--- a/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
@@ -37,6 +37,11 @@ properties:
     maxItems: 1
     description: module reset
 
+  allwinner,pwm-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The number of PWM channels configured for this instance
+    enum: [6, 9]
+
 allOf:
   - $ref: pwm.yaml#
 
@@ -47,15 +52,14 @@ allOf:
             const: allwinner,sun20i-r329-pwm
 
     then:
-      properties:
-        allwinner,pwm-channels:
-          $ref: /schemas/types.yaml#/definitions/uint32
-          description: The number of PWM channels configured for this instance
-          enum: [6, 9]
-
       required:
         - allwinner,pwm-channels
 
+    else:
+      not:
+        required:
+          - allwinner,pwm-channels
+
 required:
   - compatible
   - reg


> +
> +      required:
> +        - allwinner,pwm-channels
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#pwm-cells"
> +  - clocks
> +  - clock-names
> +  - resets
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/sun20i-d1-ccu.h>
> +    #include <dt-bindings/reset/sun20i-d1-ccu.h>
> +
> +    pwm: pwm@2000c00 {
> +      compatible = "allwinner,sun20i-d1-pwm";
> +      reg = <0x02000c00 0x400>;
> +      clocks = <&dcxo>, <&ccu CLK_BUS_PWM>;
> +      clock-names = "hosc", "bus";
> +      resets = <&ccu RST_BUS_PWM>;
> +      #pwm-cells = <0x3>;
> +    };
> +
> +...
> -- 
> 2.25.1
> 

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux