On Fri, Jun 23, 2023 at 2:27 AM Saravana Kannan <saravanak@xxxxxxxxxx> wrote: > > On Sun, Jun 18, 2023 at 11:13 PM Anup Patel <apatel@xxxxxxxxxxxxxxxx> wrote: > > > > On Sat, Jun 17, 2023 at 3:36 AM Saravana Kannan <saravanak@xxxxxxxxxx> wrote: > > > > > > On Thu, Jun 15, 2023 at 7:01 PM Anup Patel <anup@xxxxxxxxxxxxxx> wrote: > > > > > > > > On Fri, Jun 16, 2023 at 12:47 AM Saravana Kannan <saravanak@xxxxxxxxxx> wrote: > > > > > > > > > > On Tue, Jun 13, 2023 at 8:35 AM Anup Patel <apatel@xxxxxxxxxxxxxxxx> wrote: > > > > > > > > > > > > The RISC-V advanced interrupt architecture (AIA) specification defines > > > > > > a new interrupt controller for managing wired interrupts on a RISC-V > > > > > > platform. This new interrupt controller is referred to as advanced > > > > > > platform-level interrupt controller (APLIC) which can forward wired > > > > > > interrupts to CPUs (or HARTs) as local interrupts OR as message > > > > > > signaled interrupts. > > > > > > (For more details refer https://github.com/riscv/riscv-aia) > > > > > > > > > > > > This patch adds an irqchip driver for RISC-V APLIC found on RISC-V > > > > > > platforms. > > > > > > > > > > > > Signed-off-by: Anup Patel <apatel@xxxxxxxxxxxxxxxx> > > > > > > --- > > > > > > drivers/irqchip/Kconfig | 6 + > > > > > > drivers/irqchip/Makefile | 1 + > > > > > > drivers/irqchip/irq-riscv-aplic.c | 765 ++++++++++++++++++++++++++++ > > > > > > include/linux/irqchip/riscv-aplic.h | 119 +++++ > > > > > > 4 files changed, 891 insertions(+) > > > > > > create mode 100644 drivers/irqchip/irq-riscv-aplic.c > > > > > > create mode 100644 include/linux/irqchip/riscv-aplic.h > > > > > > > > > > > > diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig > > > > > > index d700980372ef..834c0329f583 100644 > > > > > > --- a/drivers/irqchip/Kconfig > > > > > > +++ b/drivers/irqchip/Kconfig > > > > > > @@ -544,6 +544,12 @@ config SIFIVE_PLIC > > > > > > select IRQ_DOMAIN_HIERARCHY > > > > > > select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP > > > > > > > > > > > > +config RISCV_APLIC > > > > > > + bool > > > > > > + depends on RISCV > > > > > > + select IRQ_DOMAIN_HIERARCHY > > > > > > + select GENERIC_MSI_IRQ > > > > > > + > > > > > > config RISCV_IMSIC > > > > > > bool > > > > > > depends on RISCV > > > > > > diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile > > > > > > index 577bde3e986b..438b8e1a152c 100644 > > > > > > --- a/drivers/irqchip/Makefile > > > > > > +++ b/drivers/irqchip/Makefile > > > > > > @@ -95,6 +95,7 @@ obj-$(CONFIG_QCOM_MPM) += irq-qcom-mpm.o > > > > > > obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o > > > > > > obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o > > > > > > obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o > > > > > > +obj-$(CONFIG_RISCV_APLIC) += irq-riscv-aplic.o > > > > > > obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic.o > > > > > > obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o > > > > > > obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o > > > > > > diff --git a/drivers/irqchip/irq-riscv-aplic.c b/drivers/irqchip/irq-riscv-aplic.c > > > > > > new file mode 100644 > > > > > > index 000000000000..1e710fdf5608 > > > > > > --- /dev/null > > > > > > +++ b/drivers/irqchip/irq-riscv-aplic.c > > > > > > @@ -0,0 +1,765 @@ > > > > > > +// SPDX-License-Identifier: GPL-2.0 > > > > > > +/* > > > > > > + * Copyright (C) 2021 Western Digital Corporation or its affiliates. > > > > > > + * Copyright (C) 2022 Ventana Micro Systems Inc. > > > > > > + */ > > > > > > + > > > > > > +#define pr_fmt(fmt) "riscv-aplic: " fmt > > > > > > +#include <linux/bitops.h> > > > > > > +#include <linux/cpu.h> > > > > > > +#include <linux/interrupt.h> > > > > > > +#include <linux/io.h> > > > > > > +#include <linux/irq.h> > > > > > > +#include <linux/irqchip.h> > > > > > > +#include <linux/irqchip/chained_irq.h> > > > > > > +#include <linux/irqchip/riscv-aplic.h> > > > > > > +#include <linux/irqchip/riscv-imsic.h> > > > > > > +#include <linux/irqdomain.h> > > > > > > +#include <linux/module.h> > > > > > > +#include <linux/msi.h> > > > > > > +#include <linux/platform_device.h> > > > > > > +#include <linux/smp.h> > > > > > > + > > > > > > +#define APLIC_DEFAULT_PRIORITY 1 > > > > > > +#define APLIC_DISABLE_IDELIVERY 0 > > > > > > +#define APLIC_ENABLE_IDELIVERY 1 > > > > > > +#define APLIC_DISABLE_ITHRESHOLD 1 > > > > > > +#define APLIC_ENABLE_ITHRESHOLD 0 > > > > > > + > > > > > > +struct aplic_msicfg { > > > > > > + phys_addr_t base_ppn; > > > > > > + u32 hhxs; > > > > > > + u32 hhxw; > > > > > > + u32 lhxs; > > > > > > + u32 lhxw; > > > > > > +}; > > > > > > + > > > > > > +struct aplic_idc { > > > > > > + unsigned int hart_index; > > > > > > + void __iomem *regs; > > > > > > + struct aplic_priv *priv; > > > > > > +}; > > > > > > + > > > > > > +struct aplic_priv { > > > > > > + struct fwnode_handle *fwnode; > > > > > > + u32 gsi_base; > > > > > > + u32 nr_irqs; > > > > > > + u32 nr_idcs; > > > > > > + void __iomem *regs; > > > > > > + struct irq_domain *irqdomain; > > > > > > + struct aplic_msicfg msicfg; > > > > > > + struct cpumask lmask; > > > > > > +}; > > > > > > + > > > > > > +static unsigned int aplic_idc_parent_irq; > > > > > > +static DEFINE_PER_CPU(struct aplic_idc, aplic_idcs); > > > > > > + > > > > > > +static void aplic_irq_unmask(struct irq_data *d) > > > > > > +{ > > > > > > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > > > > > > + > > > > > > + writel(d->hwirq, priv->regs + APLIC_SETIENUM); > > > > > > + > > > > > > + if (!priv->nr_idcs) > > > > > > + irq_chip_unmask_parent(d); > > > > > > +} > > > > > > + > > > > > > +static void aplic_irq_mask(struct irq_data *d) > > > > > > +{ > > > > > > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > > > > > > + > > > > > > + writel(d->hwirq, priv->regs + APLIC_CLRIENUM); > > > > > > + > > > > > > + if (!priv->nr_idcs) > > > > > > + irq_chip_mask_parent(d); > > > > > > +} > > > > > > + > > > > > > +static int aplic_set_type(struct irq_data *d, unsigned int type) > > > > > > +{ > > > > > > + u32 val = 0; > > > > > > + void __iomem *sourcecfg; > > > > > > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > > > > > > + > > > > > > + switch (type) { > > > > > > + case IRQ_TYPE_NONE: > > > > > > + val = APLIC_SOURCECFG_SM_INACTIVE; > > > > > > + break; > > > > > > + case IRQ_TYPE_LEVEL_LOW: > > > > > > + val = APLIC_SOURCECFG_SM_LEVEL_LOW; > > > > > > + break; > > > > > > + case IRQ_TYPE_LEVEL_HIGH: > > > > > > + val = APLIC_SOURCECFG_SM_LEVEL_HIGH; > > > > > > + break; > > > > > > + case IRQ_TYPE_EDGE_FALLING: > > > > > > + val = APLIC_SOURCECFG_SM_EDGE_FALL; > > > > > > + break; > > > > > > + case IRQ_TYPE_EDGE_RISING: > > > > > > + val = APLIC_SOURCECFG_SM_EDGE_RISE; > > > > > > + break; > > > > > > + default: > > > > > > + return -EINVAL; > > > > > > + } > > > > > > + > > > > > > + sourcecfg = priv->regs + APLIC_SOURCECFG_BASE; > > > > > > + sourcecfg += (d->hwirq - 1) * sizeof(u32); > > > > > > + writel(val, sourcecfg); > > > > > > + > > > > > > + return 0; > > > > > > +} > > > > > > + > > > > > > +static void aplic_irq_eoi(struct irq_data *d) > > > > > > +{ > > > > > > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > > > > > > + u32 reg_off, reg_mask; > > > > > > + > > > > > > + /* > > > > > > + * EOI handling only required only for level-triggered > > > > > > + * interrupts in APLIC MSI mode. > > > > > > + */ > > > > > > + > > > > > > + if (priv->nr_idcs) > > > > > > + return; > > > > > > + > > > > > > + reg_off = APLIC_CLRIP_BASE + ((d->hwirq / APLIC_IRQBITS_PER_REG) * 4); > > > > > > + reg_mask = BIT(d->hwirq % APLIC_IRQBITS_PER_REG); > > > > > > + switch (irqd_get_trigger_type(d)) { > > > > > > + case IRQ_TYPE_LEVEL_LOW: > > > > > > + if (!(readl(priv->regs + reg_off) & reg_mask)) > > > > > > + writel(d->hwirq, priv->regs + APLIC_SETIPNUM_LE); > > > > > > + break; > > > > > > + case IRQ_TYPE_LEVEL_HIGH: > > > > > > + if (readl(priv->regs + reg_off) & reg_mask) > > > > > > + writel(d->hwirq, priv->regs + APLIC_SETIPNUM_LE); > > > > > > + break; > > > > > > + } > > > > > > +} > > > > > > + > > > > > > +#ifdef CONFIG_SMP > > > > > > +static int aplic_set_affinity(struct irq_data *d, > > > > > > + const struct cpumask *mask_val, bool force) > > > > > > +{ > > > > > > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > > > > > > + struct aplic_idc *idc; > > > > > > + unsigned int cpu, val; > > > > > > + struct cpumask amask; > > > > > > + void __iomem *target; > > > > > > + > > > > > > + if (!priv->nr_idcs) > > > > > > + return irq_chip_set_affinity_parent(d, mask_val, force); > > > > > > + > > > > > > + cpumask_and(&amask, &priv->lmask, mask_val); > > > > > > + > > > > > > + if (force) > > > > > > + cpu = cpumask_first(&amask); > > > > > > + else > > > > > > + cpu = cpumask_any_and(&amask, cpu_online_mask); > > > > > > + > > > > > > + if (cpu >= nr_cpu_ids) > > > > > > + return -EINVAL; > > > > > > + > > > > > > + idc = per_cpu_ptr(&aplic_idcs, cpu); > > > > > > + target = priv->regs + APLIC_TARGET_BASE; > > > > > > + target += (d->hwirq - 1) * sizeof(u32); > > > > > > + val = idc->hart_index & APLIC_TARGET_HART_IDX_MASK; > > > > > > + val <<= APLIC_TARGET_HART_IDX_SHIFT; > > > > > > + val |= APLIC_DEFAULT_PRIORITY; > > > > > > + writel(val, target); > > > > > > + > > > > > > + irq_data_update_effective_affinity(d, cpumask_of(cpu)); > > > > > > + > > > > > > + return IRQ_SET_MASK_OK_DONE; > > > > > > +} > > > > > > +#endif > > > > > > + > > > > > > +static struct irq_chip aplic_chip = { > > > > > > + .name = "RISC-V APLIC", > > > > > > + .irq_mask = aplic_irq_mask, > > > > > > + .irq_unmask = aplic_irq_unmask, > > > > > > + .irq_set_type = aplic_set_type, > > > > > > + .irq_eoi = aplic_irq_eoi, > > > > > > +#ifdef CONFIG_SMP > > > > > > + .irq_set_affinity = aplic_set_affinity, > > > > > > +#endif > > > > > > + .flags = IRQCHIP_SET_TYPE_MASKED | > > > > > > + IRQCHIP_SKIP_SET_WAKE | > > > > > > + IRQCHIP_MASK_ON_SUSPEND, > > > > > > +}; > > > > > > + > > > > > > +static int aplic_irqdomain_translate(struct irq_fwspec *fwspec, > > > > > > + u32 gsi_base, > > > > > > + unsigned long *hwirq, > > > > > > + unsigned int *type) > > > > > > +{ > > > > > > + if (WARN_ON(fwspec->param_count < 2)) > > > > > > + return -EINVAL; > > > > > > + if (WARN_ON(!fwspec->param[0])) > > > > > > + return -EINVAL; > > > > > > + > > > > > > + /* For DT, gsi_base is always zero. */ > > > > > > + *hwirq = fwspec->param[0] - gsi_base; > > > > > > + *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK; > > > > > > + > > > > > > + WARN_ON(*type == IRQ_TYPE_NONE); > > > > > > + > > > > > > + return 0; > > > > > > +} > > > > > > + > > > > > > +static int aplic_irqdomain_msi_translate(struct irq_domain *d, > > > > > > + struct irq_fwspec *fwspec, > > > > > > + unsigned long *hwirq, > > > > > > + unsigned int *type) > > > > > > +{ > > > > > > + struct aplic_priv *priv = platform_msi_get_host_data(d); > > > > > > + > > > > > > + return aplic_irqdomain_translate(fwspec, priv->gsi_base, hwirq, type); > > > > > > +} > > > > > > + > > > > > > +static int aplic_irqdomain_msi_alloc(struct irq_domain *domain, > > > > > > + unsigned int virq, unsigned int nr_irqs, > > > > > > + void *arg) > > > > > > +{ > > > > > > + int i, ret; > > > > > > + unsigned int type; > > > > > > + irq_hw_number_t hwirq; > > > > > > + struct irq_fwspec *fwspec = arg; > > > > > > + struct aplic_priv *priv = platform_msi_get_host_data(domain); > > > > > > + > > > > > > + ret = aplic_irqdomain_translate(fwspec, priv->gsi_base, &hwirq, &type); > > > > > > + if (ret) > > > > > > + return ret; > > > > > > + > > > > > > + ret = platform_msi_device_domain_alloc(domain, virq, nr_irqs); > > > > > > + if (ret) > > > > > > + return ret; > > > > > > + > > > > > > + for (i = 0; i < nr_irqs; i++) { > > > > > > + irq_domain_set_info(domain, virq + i, hwirq + i, > > > > > > + &aplic_chip, priv, handle_fasteoi_irq, > > > > > > + NULL, NULL); > > > > > > + /* > > > > > > + * APLIC does not implement irq_disable() so Linux interrupt > > > > > > + * subsystem will take a lazy approach for disabling an APLIC > > > > > > + * interrupt. This means APLIC interrupts are left unmasked > > > > > > + * upon system suspend and interrupts are not processed > > > > > > + * immediately upon system wake up. To tackle this, we disable > > > > > > + * the lazy approach for all APLIC interrupts. > > > > > > + */ > > > > > > + irq_set_status_flags(virq + i, IRQ_DISABLE_UNLAZY); > > > > > > + } > > > > > > + > > > > > > + return 0; > > > > > > +} > > > > > > + > > > > > > +static const struct irq_domain_ops aplic_irqdomain_msi_ops = { > > > > > > + .translate = aplic_irqdomain_msi_translate, > > > > > > + .alloc = aplic_irqdomain_msi_alloc, > > > > > > + .free = platform_msi_device_domain_free, > > > > > > +}; > > > > > > + > > > > > > +static int aplic_irqdomain_idc_translate(struct irq_domain *d, > > > > > > + struct irq_fwspec *fwspec, > > > > > > + unsigned long *hwirq, > > > > > > + unsigned int *type) > > > > > > +{ > > > > > > + struct aplic_priv *priv = d->host_data; > > > > > > + > > > > > > + return aplic_irqdomain_translate(fwspec, priv->gsi_base, hwirq, type); > > > > > > +} > > > > > > + > > > > > > +static int aplic_irqdomain_idc_alloc(struct irq_domain *domain, > > > > > > + unsigned int virq, unsigned int nr_irqs, > > > > > > + void *arg) > > > > > > +{ > > > > > > + int i, ret; > > > > > > + unsigned int type; > > > > > > + irq_hw_number_t hwirq; > > > > > > + struct irq_fwspec *fwspec = arg; > > > > > > + struct aplic_priv *priv = domain->host_data; > > > > > > + > > > > > > + ret = aplic_irqdomain_translate(fwspec, priv->gsi_base, &hwirq, &type); > > > > > > + if (ret) > > > > > > + return ret; > > > > > > + > > > > > > + for (i = 0; i < nr_irqs; i++) { > > > > > > + irq_domain_set_info(domain, virq + i, hwirq + i, > > > > > > + &aplic_chip, priv, handle_fasteoi_irq, > > > > > > + NULL, NULL); > > > > > > + irq_set_affinity(virq + i, &priv->lmask); > > > > > > + /* See the reason described in aplic_irqdomain_msi_alloc() */ > > > > > > + irq_set_status_flags(virq + i, IRQ_DISABLE_UNLAZY); > > > > > > + } > > > > > > + > > > > > > + return 0; > > > > > > +} > > > > > > + > > > > > > +static const struct irq_domain_ops aplic_irqdomain_idc_ops = { > > > > > > + .translate = aplic_irqdomain_idc_translate, > > > > > > + .alloc = aplic_irqdomain_idc_alloc, > > > > > > + .free = irq_domain_free_irqs_top, > > > > > > +}; > > > > > > + > > > > > > +static void aplic_init_hw_irqs(struct aplic_priv *priv) > > > > > > +{ > > > > > > + int i; > > > > > > + > > > > > > + /* Disable all interrupts */ > > > > > > + for (i = 0; i <= priv->nr_irqs; i += 32) > > > > > > + writel(-1U, priv->regs + APLIC_CLRIE_BASE + > > > > > > + (i / 32) * sizeof(u32)); > > > > > > + > > > > > > + /* Set interrupt type and default priority for all interrupts */ > > > > > > + for (i = 1; i <= priv->nr_irqs; i++) { > > > > > > + writel(0, priv->regs + APLIC_SOURCECFG_BASE + > > > > > > + (i - 1) * sizeof(u32)); > > > > > > + writel(APLIC_DEFAULT_PRIORITY, > > > > > > + priv->regs + APLIC_TARGET_BASE + > > > > > > + (i - 1) * sizeof(u32)); > > > > > > + } > > > > > > + > > > > > > + /* Clear APLIC domaincfg */ > > > > > > + writel(0, priv->regs + APLIC_DOMAINCFG); > > > > > > +} > > > > > > + > > > > > > +static void aplic_init_hw_global(struct aplic_priv *priv) > > > > > > +{ > > > > > > + u32 val; > > > > > > +#ifdef CONFIG_RISCV_M_MODE > > > > > > + u32 valH; > > > > > > + > > > > > > + if (!priv->nr_idcs) { > > > > > > + val = priv->msicfg.base_ppn; > > > > > > + valH = (priv->msicfg.base_ppn >> 32) & > > > > > > + APLIC_xMSICFGADDRH_BAPPN_MASK; > > > > > > + valH |= (priv->msicfg.lhxw & APLIC_xMSICFGADDRH_LHXW_MASK) > > > > > > + << APLIC_xMSICFGADDRH_LHXW_SHIFT; > > > > > > + valH |= (priv->msicfg.hhxw & APLIC_xMSICFGADDRH_HHXW_MASK) > > > > > > + << APLIC_xMSICFGADDRH_HHXW_SHIFT; > > > > > > + valH |= (priv->msicfg.lhxs & APLIC_xMSICFGADDRH_LHXS_MASK) > > > > > > + << APLIC_xMSICFGADDRH_LHXS_SHIFT; > > > > > > + valH |= (priv->msicfg.hhxs & APLIC_xMSICFGADDRH_HHXS_MASK) > > > > > > + << APLIC_xMSICFGADDRH_HHXS_SHIFT; > > > > > > + writel(val, priv->regs + APLIC_xMSICFGADDR); > > > > > > + writel(valH, priv->regs + APLIC_xMSICFGADDRH); > > > > > > + } > > > > > > +#endif > > > > > > + > > > > > > + /* Setup APLIC domaincfg register */ > > > > > > + val = readl(priv->regs + APLIC_DOMAINCFG); > > > > > > + val |= APLIC_DOMAINCFG_IE; > > > > > > + if (!priv->nr_idcs) > > > > > > + val |= APLIC_DOMAINCFG_DM; > > > > > > + writel(val, priv->regs + APLIC_DOMAINCFG); > > > > > > + if (readl(priv->regs + APLIC_DOMAINCFG) != val) > > > > > > + pr_warn("%pfwP: unable to write 0x%x in domaincfg\n", > > > > > > + priv->fwnode, val); > > > > > > +} > > > > > > + > > > > > > +static void aplic_msi_write_msg(struct msi_desc *desc, struct msi_msg *msg) > > > > > > +{ > > > > > > + unsigned int group_index, hart_index, guest_index, val; > > > > > > + struct irq_data *d = irq_get_irq_data(desc->irq); > > > > > > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > > > > > > + struct aplic_msicfg *mc = &priv->msicfg; > > > > > > + phys_addr_t tppn, tbppn, msg_addr; > > > > > > + void __iomem *target; > > > > > > + > > > > > > + /* For zeroed MSI, simply write zero into the target register */ > > > > > > + if (!msg->address_hi && !msg->address_lo && !msg->data) { > > > > > > + target = priv->regs + APLIC_TARGET_BASE; > > > > > > + target += (d->hwirq - 1) * sizeof(u32); > > > > > > + writel(0, target); > > > > > > + return; > > > > > > + } > > > > > > + > > > > > > + /* Sanity check on message data */ > > > > > > + WARN_ON(msg->data > APLIC_TARGET_EIID_MASK); > > > > > > + > > > > > > + /* Compute target MSI address */ > > > > > > + msg_addr = (((u64)msg->address_hi) << 32) | msg->address_lo; > > > > > > + tppn = msg_addr >> APLIC_xMSICFGADDR_PPN_SHIFT; > > > > > > + > > > > > > + /* Compute target HART Base PPN */ > > > > > > + tbppn = tppn; > > > > > > + tbppn &= ~APLIC_xMSICFGADDR_PPN_HART(mc->lhxs); > > > > > > + tbppn &= ~APLIC_xMSICFGADDR_PPN_LHX(mc->lhxw, mc->lhxs); > > > > > > + tbppn &= ~APLIC_xMSICFGADDR_PPN_HHX(mc->hhxw, mc->hhxs); > > > > > > + WARN_ON(tbppn != mc->base_ppn); > > > > > > + > > > > > > + /* Compute target group and hart indexes */ > > > > > > + group_index = (tppn >> APLIC_xMSICFGADDR_PPN_HHX_SHIFT(mc->hhxs)) & > > > > > > + APLIC_xMSICFGADDR_PPN_HHX_MASK(mc->hhxw); > > > > > > + hart_index = (tppn >> APLIC_xMSICFGADDR_PPN_LHX_SHIFT(mc->lhxs)) & > > > > > > + APLIC_xMSICFGADDR_PPN_LHX_MASK(mc->lhxw); > > > > > > + hart_index |= (group_index << mc->lhxw); > > > > > > + WARN_ON(hart_index > APLIC_TARGET_HART_IDX_MASK); > > > > > > + > > > > > > + /* Compute target guest index */ > > > > > > + guest_index = tppn & APLIC_xMSICFGADDR_PPN_HART(mc->lhxs); > > > > > > + WARN_ON(guest_index > APLIC_TARGET_GUEST_IDX_MASK); > > > > > > + > > > > > > + /* Update IRQ TARGET register */ > > > > > > + target = priv->regs + APLIC_TARGET_BASE; > > > > > > + target += (d->hwirq - 1) * sizeof(u32); > > > > > > + val = (hart_index & APLIC_TARGET_HART_IDX_MASK) > > > > > > + << APLIC_TARGET_HART_IDX_SHIFT; > > > > > > + val |= (guest_index & APLIC_TARGET_GUEST_IDX_MASK) > > > > > > + << APLIC_TARGET_GUEST_IDX_SHIFT; > > > > > > + val |= (msg->data & APLIC_TARGET_EIID_MASK); > > > > > > + writel(val, target); > > > > > > +} > > > > > > + > > > > > > +static int aplic_setup_msi(struct aplic_priv *priv) > > > > > > +{ > > > > > > + struct aplic_msicfg *mc = &priv->msicfg; > > > > > > + const struct imsic_global_config *imsic_global; > > > > > > + > > > > > > + /* > > > > > > + * The APLIC outgoing MSI config registers assume target MSI > > > > > > + * controller to be RISC-V AIA IMSIC controller. > > > > > > + */ > > > > > > + imsic_global = imsic_get_global_config(); > > > > > > + if (!imsic_global) { > > > > > > + pr_err("%pfwP: IMSIC global config not found\n", > > > > > > + priv->fwnode); > > > > > > + return -ENODEV; > > > > > > + } > > > > > > + > > > > > > + /* Find number of guest index bits (LHXS) */ > > > > > > + mc->lhxs = imsic_global->guest_index_bits; > > > > > > + if (APLIC_xMSICFGADDRH_LHXS_MASK < mc->lhxs) { > > > > > > + pr_err("%pfwP: IMSIC guest index bits big for APLIC LHXS\n", > > > > > > + priv->fwnode); > > > > > > + return -EINVAL; > > > > > > + } > > > > > > + > > > > > > + /* Find number of HART index bits (LHXW) */ > > > > > > + mc->lhxw = imsic_global->hart_index_bits; > > > > > > + if (APLIC_xMSICFGADDRH_LHXW_MASK < mc->lhxw) { > > > > > > + pr_err("%pfwP: IMSIC hart index bits big for APLIC LHXW\n", > > > > > > + priv->fwnode); > > > > > > + return -EINVAL; > > > > > > + } > > > > > > + > > > > > > + /* Find number of group index bits (HHXW) */ > > > > > > + mc->hhxw = imsic_global->group_index_bits; > > > > > > + if (APLIC_xMSICFGADDRH_HHXW_MASK < mc->hhxw) { > > > > > > + pr_err("%pfwP: IMSIC group index bits big for APLIC HHXW\n", > > > > > > + priv->fwnode); > > > > > > + return -EINVAL; > > > > > > + } > > > > > > + > > > > > > + /* Find first bit position of group index (HHXS) */ > > > > > > + mc->hhxs = imsic_global->group_index_shift; > > > > > > + if (mc->hhxs < (2 * APLIC_xMSICFGADDR_PPN_SHIFT)) { > > > > > > + pr_err("%pfwP: IMSIC group index shift should be >= %d\n", > > > > > > + priv->fwnode, (2 * APLIC_xMSICFGADDR_PPN_SHIFT)); > > > > > > + return -EINVAL; > > > > > > + } > > > > > > + mc->hhxs -= (2 * APLIC_xMSICFGADDR_PPN_SHIFT); > > > > > > + if (APLIC_xMSICFGADDRH_HHXS_MASK < mc->hhxs) { > > > > > > + pr_err("%pfwP: IMSIC group index shift big for APLIC HHXS\n", > > > > > > + priv->fwnode); > > > > > > + return -EINVAL; > > > > > > + } > > > > > > + > > > > > > + /* Compute PPN base */ > > > > > > + mc->base_ppn = imsic_global->base_addr >> APLIC_xMSICFGADDR_PPN_SHIFT; > > > > > > + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_HART(mc->lhxs); > > > > > > + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_LHX(mc->lhxw, mc->lhxs); > > > > > > + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_HHX(mc->hhxw, mc->hhxs); > > > > > > + > > > > > > + /* Use all possible CPUs as lmask */ > > > > > > + cpumask_copy(&priv->lmask, cpu_possible_mask); > > > > > > + > > > > > > + return 0; > > > > > > +} > > > > > > + > > > > > > +/* > > > > > > + * To handle an APLIC IDC interrupts, we just read the CLAIMI register > > > > > > + * which will return highest priority pending interrupt and clear the > > > > > > + * pending bit of the interrupt. This process is repeated until CLAIMI > > > > > > + * register return zero value. > > > > > > + */ > > > > > > +static void aplic_idc_handle_irq(struct irq_desc *desc) > > > > > > +{ > > > > > > + struct aplic_idc *idc = this_cpu_ptr(&aplic_idcs); > > > > > > + struct irq_chip *chip = irq_desc_get_chip(desc); > > > > > > + irq_hw_number_t hw_irq; > > > > > > + int irq; > > > > > > + > > > > > > + chained_irq_enter(chip, desc); > > > > > > + > > > > > > + while ((hw_irq = readl(idc->regs + APLIC_IDC_CLAIMI))) { > > > > > > + hw_irq = hw_irq >> APLIC_IDC_TOPI_ID_SHIFT; > > > > > > + irq = irq_find_mapping(idc->priv->irqdomain, hw_irq); > > > > > > + > > > > > > + if (unlikely(irq <= 0)) > > > > > > + pr_warn_ratelimited("hw_irq %lu mapping not found\n", > > > > > > + hw_irq); > > > > > > + else > > > > > > + generic_handle_irq(irq); > > > > > > + } > > > > > > + > > > > > > + chained_irq_exit(chip, desc); > > > > > > +} > > > > > > + > > > > > > +static void aplic_idc_set_delivery(struct aplic_idc *idc, bool en) > > > > > > +{ > > > > > > + u32 de = (en) ? APLIC_ENABLE_IDELIVERY : APLIC_DISABLE_IDELIVERY; > > > > > > + u32 th = (en) ? APLIC_ENABLE_ITHRESHOLD : APLIC_DISABLE_ITHRESHOLD; > > > > > > + > > > > > > + /* Priority must be less than threshold for interrupt triggering */ > > > > > > + writel(th, idc->regs + APLIC_IDC_ITHRESHOLD); > > > > > > + > > > > > > + /* Delivery must be set to 1 for interrupt triggering */ > > > > > > + writel(de, idc->regs + APLIC_IDC_IDELIVERY); > > > > > > +} > > > > > > + > > > > > > +static int aplic_idc_dying_cpu(unsigned int cpu) > > > > > > +{ > > > > > > + if (aplic_idc_parent_irq) > > > > > > + disable_percpu_irq(aplic_idc_parent_irq); > > > > > > + > > > > > > + return 0; > > > > > > +} > > > > > > + > > > > > > +static int aplic_idc_starting_cpu(unsigned int cpu) > > > > > > +{ > > > > > > + if (aplic_idc_parent_irq) > > > > > > + enable_percpu_irq(aplic_idc_parent_irq, > > > > > > + irq_get_trigger_type(aplic_idc_parent_irq)); > > > > > > + > > > > > > + return 0; > > > > > > +} > > > > > > + > > > > > > +static int aplic_setup_idc(struct aplic_priv *priv) > > > > > > +{ > > > > > > + int i, j, rc, cpu, setup_count = 0; > > > > > > + struct fwnode_reference_args parent; > > > > > > + struct irq_domain *domain; > > > > > > + unsigned long hartid; > > > > > > + struct aplic_idc *idc; > > > > > > + u32 val; > > > > > > + > > > > > > + /* Setup per-CPU IDC and target CPU mask */ > > > > > > + for (i = 0; i < priv->nr_idcs; i++) { > > > > > > + rc = fwnode_property_get_reference_args(priv->fwnode, > > > > > > + "interrupts-extended", "#interrupt-cells", > > > > > > + 0, i, &parent); > > > > > > + if (rc) { > > > > > > + pr_warn("%pfwP: parent irq for IDC%d not found\n", > > > > > > + priv->fwnode, i); > > > > > > + continue; > > > > > > + } > > > > > > + > > > > > > + /* > > > > > > + * Skip interrupts other than external interrupts for > > > > > > + * current privilege level. > > > > > > + */ > > > > > > + if (parent.args[0] != RV_IRQ_EXT) > > > > > > + continue; > > > > > > + > > > > > > + rc = riscv_fw_parent_hartid(parent.fwnode, &hartid); > > > > > > + if (rc) { > > > > > > + pr_warn("%pfwP: invalid hartid for IDC%d\n", > > > > > > + priv->fwnode, i); > > > > > > + continue; > > > > > > + } > > > > > > + > > > > > > + cpu = riscv_hartid_to_cpuid(hartid); > > > > > > + if (cpu < 0) { > > > > > > + pr_warn("%pfwP: invalid cpuid for IDC%d\n", > > > > > > + priv->fwnode, i); > > > > > > + continue; > > > > > > + } > > > > > > + > > > > > > + cpumask_set_cpu(cpu, &priv->lmask); > > > > > > + > > > > > > + idc = per_cpu_ptr(&aplic_idcs, cpu); > > > > > > + idc->hart_index = i; > > > > > > + idc->regs = priv->regs + APLIC_IDC_BASE + i * APLIC_IDC_SIZE; > > > > > > + idc->priv = priv; > > > > > > + > > > > > > + aplic_idc_set_delivery(idc, true); > > > > > > + > > > > > > + /* > > > > > > + * Boot cpu might not have APLIC hart_index = 0 so check > > > > > > + * and update target registers of all interrupts. > > > > > > + */ > > > > > > + if (cpu == smp_processor_id() && idc->hart_index) { > > > > > > + val = idc->hart_index & APLIC_TARGET_HART_IDX_MASK; > > > > > > + val <<= APLIC_TARGET_HART_IDX_SHIFT; > > > > > > + val |= APLIC_DEFAULT_PRIORITY; > > > > > > + for (j = 1; j <= priv->nr_irqs; j++) > > > > > > + writel(val, priv->regs + APLIC_TARGET_BASE + > > > > > > + (j - 1) * sizeof(u32)); > > > > > > + } > > > > > > + > > > > > > + setup_count++; > > > > > > + } > > > > > > + > > > > > > + /* Find parent domain and register chained handler */ > > > > > > + domain = irq_find_matching_fwnode(riscv_get_intc_hwnode(), > > > > > > + DOMAIN_BUS_ANY); > > > > > > + if (!aplic_idc_parent_irq && domain) { > > > > > > + aplic_idc_parent_irq = irq_create_mapping(domain, RV_IRQ_EXT); > > > > > > + if (aplic_idc_parent_irq) { > > > > > > + irq_set_chained_handler(aplic_idc_parent_irq, > > > > > > + aplic_idc_handle_irq); > > > > > > + > > > > > > + /* > > > > > > + * Setup CPUHP notifier to enable IDC parent > > > > > > + * interrupt on all CPUs > > > > > > + */ > > > > > > + cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, > > > > > > + "irqchip/riscv/aplic:starting", > > > > > > + aplic_idc_starting_cpu, > > > > > > + aplic_idc_dying_cpu); > > > > > > + } > > > > > > + } > > > > > > + > > > > > > + /* Fail if we were not able to setup IDC for any CPU */ > > > > > > + return (setup_count) ? 0 : -ENODEV; > > > > > > +} > > > > > > + > > > > > > +static int aplic_probe(struct platform_device *pdev) > > > > > > +{ > > > > > > + struct fwnode_handle *fwnode = pdev->dev.fwnode; > > > > > > + struct fwnode_reference_args parent; > > > > > > + struct aplic_priv *priv; > > > > > > + struct resource *res; > > > > > > + phys_addr_t pa; > > > > > > + int rc; > > > > > > + > > > > > > + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); > > > > > > + if (!priv) > > > > > > + return -ENOMEM; > > > > > > + priv->fwnode = fwnode; > > > > > > + > > > > > > + /* Map the MMIO registers */ > > > > > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > > > > > + if (!res) { > > > > > > + pr_err("%pfwP: failed to get MMIO resource\n", fwnode); > > > > > > + return -EINVAL; > > > > > > + } > > > > > > + priv->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); > > > > > > + if (!priv->regs) { > > > > > > + pr_err("%pfwP: failed map MMIO registers\n", fwnode); > > > > > > + return -ENOMEM; > > > > > > + } > > > > > > + > > > > > > + /* > > > > > > + * Find out GSI base number > > > > > > + * > > > > > > + * Note: DT does not define "riscv,gsi-base" property so GSI > > > > > > + * base is always zero for DT. > > > > > > + */ > > > > > > + rc = fwnode_property_read_u32_array(fwnode, "riscv,gsi-base", > > > > > > + &priv->gsi_base, 1); > > > > > > + if (rc) > > > > > > + priv->gsi_base = 0; > > > > > > + > > > > > > + /* Find out number of interrupt sources */ > > > > > > + rc = fwnode_property_read_u32_array(fwnode, "riscv,num-sources", > > > > > > + &priv->nr_irqs, 1); > > > > > > + if (rc) { > > > > > > + pr_err("%pfwP: failed to get number of interrupt sources\n", > > > > > > + fwnode); > > > > > > + return rc; > > > > > > + } > > > > > > + > > > > > > + /* Setup initial state APLIC interrupts */ > > > > > > + aplic_init_hw_irqs(priv); > > > > > > + > > > > > > + /* > > > > > > + * Find out number of IDCs based on parent interrupts > > > > > > + * > > > > > > + * If "msi-parent" property is present then we ignore the > > > > > > + * APLIC IDCs which forces the APLIC driver to use MSI mode. > > > > > > + */ > > > > > > + if (!fwnode_property_present(fwnode, "msi-parent")) { > > > > > > + while (!fwnode_property_get_reference_args(fwnode, > > > > > > + "interrupts-extended", "#interrupt-cells", > > > > > > + 0, priv->nr_idcs, &parent)) > > > > > > + priv->nr_idcs++; > > > > > > + } > > > > > > + > > > > > > + /* Setup IDCs or MSIs based on number of IDCs */ > > > > > > + if (priv->nr_idcs) > > > > > > + rc = aplic_setup_idc(priv); > > > > > > + else > > > > > > + rc = aplic_setup_msi(priv); > > > > > > + if (rc) { > > > > > > + pr_err("%pfwP: failed setup %s\n", > > > > > > + fwnode, priv->nr_idcs ? "IDCs" : "MSIs"); > > > > > > + return rc; > > > > > > + } > > > > > > + > > > > > > + /* Setup global config and interrupt delivery */ > > > > > > + aplic_init_hw_global(priv); > > > > > > + > > > > > > + /* Create irq domain instance for the APLIC */ > > > > > > + if (priv->nr_idcs) > > > > > > + priv->irqdomain = irq_domain_create_linear( > > > > > > + priv->fwnode, > > > > > > + priv->nr_irqs + 1, > > > > > > + &aplic_irqdomain_idc_ops, > > > > > > + priv); > > > > > > + else > > > > > > + priv->irqdomain = platform_msi_create_device_domain( > > > > > > + &pdev->dev, > > > > > > + priv->nr_irqs + 1, > > > > > > + aplic_msi_write_msg, > > > > > > + &aplic_irqdomain_msi_ops, > > > > > > + priv); > > > > > > + if (!priv->irqdomain) { > > > > > > + pr_err("%pfwP: failed to add irq domain\n", priv->fwnode); > > > > > > + return -ENOMEM; > > > > > > + } > > > > > > + > > > > > > + /* Advertise the interrupt controller */ > > > > > > + if (priv->nr_idcs) { > > > > > > + pr_info("%pfwP: %d interrupts directly connected to %d CPUs\n", > > > > > > + priv->fwnode, priv->nr_irqs, priv->nr_idcs); > > > > > > + } else { > > > > > > + pa = priv->msicfg.base_ppn << APLIC_xMSICFGADDR_PPN_SHIFT; > > > > > > + pr_info("%pfwP: %d interrupts forwared to MSI base %pa\n", > > > > > > + priv->fwnode, priv->nr_irqs, &pa); > > > > > > + } > > > > > > + > > > > > > + return 0; > > > > > > +} > > > > > > + > > > > > > +static const struct of_device_id aplic_match[] = { > > > > > > + { .compatible = "riscv,aplic" }, > > > > > > + {} > > > > > > +}; > > > > > > + > > > > > > +static struct platform_driver aplic_driver = { > > > > > > + .driver = { > > > > > > + .name = "riscv-aplic", > > > > > > + .of_match_table = aplic_match, > > > > > > + }, > > > > > > + .probe = aplic_probe, > > > > > > +}; > > > > > > +builtin_platform_driver(aplic_driver); > > > > > > + > > > > > > +static int __init aplic_dt_init(struct device_node *node, > > > > > > + struct device_node *parent) > > > > > > +{ > > > > > > + /* > > > > > > + * The APLIC platform driver needs to be probed early > > > > > > + * so for device tree: > > > > > > + * > > > > > > + * 1) Set the FWNODE_FLAG_BEST_EFFORT flag in fwnode which > > > > > > + * provides a hint to the device driver core to probe the > > > > > > + * platform driver early. > > > > > > + * 2) Clear the OF_POPULATED flag in device_node because > > > > > > + * of_irq_init() sets it which prevents creation of > > > > > > + * platform device. > > > > > > + */ > > > > > > + node->fwnode.flags |= FWNODE_FLAG_BEST_EFFORT; > > > > > > > > > > NACK. You are blindly plastering flags without trying to understand > > > > > the real issue and fixing this correctly. > > > > > > > > > > > + of_node_clear_flag(node, OF_POPULATED); > > > > > > + return 0; > > > > > > +} > > > > > > +IRQCHIP_DECLARE(riscv_aplic, "riscv,aplic", aplic_dt_init); > > > > > > > > > > This macro pretty much skips the entire driver core framework to probe > > > > > and calls init and you are supposed to initialize the device when the > > > > > init function is called. > > > > > > > > > > If you want your device/driver to follow the proper platform driver > > > > > path (which is recommended), then you need to use the > > > > > IRQCHIP_PLATFORM_DRIVER_BEGIN() and related macros. Grep for plenty of examples. > > > > > > > > > > I offered to help you debug this issue and I asked for a dts file that > > > > > corresponds to a board you are testing this on and seeing an issue. > > > > > But you haven't answered my question [1] and are pointing to some > > > > > random commit and blaming it. That commit has no impact on any > > > > > existing devices/drivers. > > > > > > > > > > Hi Marc, > > > > > > > > > > Please consider this patch Nacked as long as FWNODE_FLAG_BEST_EFFORT > > > > > is used or until Anup actually works with us to debug the real issue. > > > > > > > > Maybe I misread your previous comment. > > > > > > > > You can easily reproduce the issue on QEMU virt machine for RISC-V: > > > > 1) Build qemu-system-riscv64 from latest QEMU master > > > > 2) Build kernel from riscv_aia_v4 branch at https://github.com/avpatel/linux.git > > > > (Note: make sure you remove the FWNODE_FLAG_BEST_EFFORT flag from > > > > APLIC driver at the time of building kernel) > > > > 3) Boot a APLIC-only system on QEMU virt machine > > > > qemu-system-riscv64 -smp 4 -M virt,aia=aplic -m 1G -nographic \ > > > > -bios opensbi/build/platform/generic/firmware/fw_dynamic.bin \ > > > > -kernel ./build-riscv64/arch/riscv/boot/Image \ > > > > -append "root=/dev/ram rw console=ttyS0 earlycon" \ > > > > -initrd ./rootfs_riscv64.img > > > > > > Unfortunately, I don't have the time to do all that, but I generally > > > don't need to run something to figure out the issue. It's generally > > > fairly obvious once I look at the DT. I'll also lean on you for some > > > debug logs. > > > > The boot log with FWNODE_BEST_EFFORT flag in APLIC can be > > found at: > > https://drive.google.com/file/d/1C-uuHbh6Zk9xkAsfGLfhb_4WighvmQp1/view?usp=sharing > > > > The boot log without FWNODE_BEST_EFFORT flag in APLIC can > > be found at: > > https://drive.google.com/file/d/12SRdR-2Frv_5O06kbuI_LUJ88khjf_7O/view?usp=sharing > > > > > > > > Where is the dts file that corresponds to this QEMU run? This is the > > > third time I'm asking for a pointer to a dts file that has this issue, > > > can you point me to it please? I shouldn't have to say this but: put > > > it somewhere and point me to it please. Please don't point me to some > > > git repo and ask me to dig around. > > > > For QEMU virt machine, the DTB is generated at runtime as part of > > virt machine creation. The DTS dumped by QEMU using the "dumpdtb" > > command line option can be found at: > > https://drive.google.com/file/d/1EU-exItL1B7EWuoXw4q-Ypocq--5Wvn8/view?usp=sharing > > > > > > > > Can you give me details on what supplier is causing the deferred probe > > > that's a problem for you? Any other details you can provide that'll > > > help debug this issue? > > > > FWNODE supplier for APLIC DT node is the OF framework. > > > > > > > > > I hope the above steps help you reproduce the issue. I will certainly > > > > test whatever fix you propose. > > > > > > Do you plan to try the fix I suggested already? The one about using > > > the correct macros? > > > > You mean use IRQCHIP_DECLARE() in the APLIC driver ? > > or something else ? > > No. My previous email asking you to NOT use IRQCHIP_DECLARE() and > instead use IRQCHIP_PLATFORM_DRIVER_BEGIN/END() macros. I tried IRQCHIP_PLATFORM_DRIVER_BEGIN/END() macros but these macros are not suitable for APLIC driver because we need platform device pointer in the APLIC probe() to create platform MSI device domain (refer, platform_msi_create_device_domain()). Further, I tried setting the "suppress_bind_attrs" flag in "struct platform_driver aplic_driver" just like the IRQCHIP_PLATFORM_DRIVER_END() macro but this did not work. Regards, Anup
