Re: [PATCH v2 1/2] dt-bindings: backlight: document new property default-brightness-level

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jun 22, 2023 at 5:13 AM Rob Herring <robh@xxxxxxxxxx> wrote:
>
> On Thu, Jun 22, 2023 at 12:54:56AM +0300, Alexandru Ardelean wrote:
> > From: Yannick Fertre <yannick.fertre@xxxxxxxxxxx>
> >
> > Add documentation for new default-brightness-level property.
>
> Why?

I'll admit, I liked the fact that the "default-brightness-level" is
more uniform in the space of backlights.
The "default-on" property is more specific to the gpio-backlight driver.
And then there's gpio hogging that could also work.

>
> >
> > Signed-off-by: Yannick Fertre <yannick.fertre@xxxxxxxxxxx>
> > Signed-off-by: Alexandru Ardelean <alex@xxxxxxxxxxx>
> > ---
> >
> > Link to original patch:
> >   https://github.com/STMicroelectronics/linux/commit/c4067d7bd883c6fa14ffd49892c4ce663cdafe98
> >
> > Changelog v1 -> v2:
> > * https://lore.kernel.org/dri-devel/20230519200520.10657-2-alex@xxxxxxxxxxx/
> > * removed 'brightness-levels' reference
> > * updated doc-text for 'default-brightness-level'
> > * updated doc-text for 'default-on'
> > * added 'minimum' & 'maximum' to 'default-brightness-level' property
> > * removed 'Reviewed-by: Philippe CORNU <philippe.cornu@xxxxxxxxxxx>' as
> >   requested
> > * patch is first in series of 2 patches (was second patch)
> >
> >  .../bindings/leds/backlight/gpio-backlight.yaml    | 14 +++++++++++++-
> >  1 file changed, 13 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
> > index 584030b6b0b9..2da6552a207c 100644
> > --- a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
> > +++ b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
> > @@ -20,9 +20,21 @@ properties:
> >      maxItems: 1
> >
> >    default-on:
> > -    description: enable the backlight at boot.
> > +    description:
> > +      The default power state of the backlight at boot.
> >      type: boolean
> >
> > +  default-brightness-level:
> > +    description:
> > +      The default brightness level on device init. The value can be 0 or 1.
> > +      If omitted, the value is 1. In the context of the "gpio-backlight" driver
> > +      the effect of this setting will be that the backlight is on/off.
> > +      The difference between this setting and "default-on" is that this handles
> > +      brightness, while "default-on" handles the power setting of the device.
>
> What power setting? You only have 1 GPIO to control here which is 2
> states. I fail to see why you need 6 possible states with all the
> combinations of 2 properties.

So, the "default-on" bool gets converted to backlight power settings,
which eventually gets converted back to GPIO values (at some point).
Which sounds quirky (when saying/writing it).

But, yeah.
That's one thing that also made me a bit undecided to send this.
On the one hand I like the uniformity it brings.
On the other hand, because there is the legacy behavior (the
"default-on" property, and the fact that we can use the GPIO DT
settings to control this) just explodes complexity/quirks.

We can probably just drop this.
I'll also admit that my doc-writing skills aren't too great.

Thanks
Alex

>
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    minimum: 0
> > +    maximum: 1
> > +
> >  required:
> >    - compatible
> >    - gpios
> > --
> > 2.40.1
> >




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux