On Thu, 4 Dec 2014 11:30:39 +0100 Nicolas Ferre <nicolas.ferre@xxxxxxxxx> wrote: > Le 03/12/2014 21:44, Boris Brezillon a écrit : > > The EBI (External Bus Interface) is used to access external peripherals > > (NOR, SRAM, NAND, and other specific devices like ethernet controllers). > > Each device is assigned a CS line and an address range and can have its > > own configuration (timings, access mode, bus width, ...). > > This driver provides a generic DT binding to configure a device according > > to its requirements. > > For specific device controllers (like the NAND one) the SMC timings > > should be configured by the controller driver through the matrix and smc > > syscon regmaps. > > > > Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx> > > --- > > .../bindings/memory-controllers/atmel-ebi.txt | 155 +++++++++++++++++++++ > > 1 file changed, 155 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/memory-controllers/atmel-ebi.txt > > > > diff --git a/Documentation/devicetree/bindings/memory-controllers/atmel-ebi.txt b/Documentation/devicetree/bindings/memory-controllers/atmel-ebi.txt > > new file mode 100644 > > index 0000000..3749ea1 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/memory-controllers/atmel-ebi.txt > > @@ -0,0 +1,155 @@ > > +* Device tree bindings for Atmel EBI > > + > > +The External Bus Interface (EBI) controller is a bus where you can connect > > +asynchronous (NAND, NOR, SRAM, ....) and synchronous memories (SDR/DDR SDRAMs). > > +The EBI provides a glue-less interface to asynchronous memories though the SMC > > +(Static Memory Controller). > > +Synchronous memories (and some asynchronous memories like NANDs) can be > > +attached to specialized controllers which are responsible for configuring the > > +bus appropriately according to the connected device. > > +In the other hand, the bus interface can be automated for simple asynchronous > > +devices. > > + > > +Required properties: > > + > > +- compatible: "atmel,at91sam9260-ebi" > > + "atmel,at91sam9261-ebi" > > + "atmel,at91sam9263-ebi0" > > + "atmel,at91sam9263-ebi1" > > + "atmel,at91sam9g45-ebi" > > + "atmel,at91sam9x5-ebi" > > + "atmel,sama5d3-ebi" > > + > > +- reg: Contains offset/length value for EBI memory mapping. > > + This property might contain several entries if the EBI > > + memory range is not contiguous > > + > > +- #address-cells: Must be 2. > > + The first cell encodes the CS. > > + The second cell encode the offset into the CS memory > > + range. > > + > > +- #size-cells: Must be set to 1. > > + > > +- ranges: Encodes CS to memory region association. > > + > > +- clocks: Clock feeding the EBI controller. > > + See clock-bindings.txt > > + > > +Child chip-select (cs) nodes contain the memory devices nodes connected to > > +such as NOR (e.g. cfi-flash) and NAND. > > +There might be board specific devices like FPGAs. > > +You'll define you device requirements in these child nodes. > > + > > +Required child cs node properties: > > + > > +- #address-cells: Must be 2. > > + > > +- #size-cells: Must be 1. > > + > > +- ranges: Empty property indicating that child nodes can inherit > > + memory layout. > > + > > +Optional child cs node properties: > > +- atmel,generic-dev boolean property specifying if the device is > > + a generic device. > > Here, you mean: "atmel,specialized-logic" and the corresponding text... > Yep, apparently I squashed the doc fixes in the wrong commit :-(. I'll fix that. Thanks, Boris -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
