On 21/06/2023 17:39, Konrad Dybcio wrote: > The Mitsumie MM8013 is an I2C fuel gauge for Li-Ion cells. The partial Mitsumi > datasheet is available at [1]. Add bindings for this chip. > > [1] https://www.mitsumi.co.jp/latest-M/Catalog/pdf/battery_mm_8013_e.pdf > Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> > --- > .../bindings/power/supply/mitsumi,mm8013.yaml | 35 ++++++++++++++++++++++ > 1 file changed, 35 insertions(+) > > diff --git a/Documentation/devicetree/bindings/power/supply/mitsumi,mm8013.yaml b/Documentation/devicetree/bindings/power/supply/mitsumi,mm8013.yaml > new file mode 100644 > index 000000000000..080fd44083ac > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/supply/mitsumi,mm8013.yaml > @@ -0,0 +1,35 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/power/supply/mitsumi,mm8013.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Mitsumi MM8013 fuel gauge > + > +maintainers: > + - Konrad Dybcio <konradybcio@xxxxxxxxxx> > + > +properties: > + compatible: > + const: mitsumi,mm8013 > + > + reg: > + maxItems: 1 I think you miss several properties: three power supplies (although not all might be needed) and most likely monitored-battery. One regulator output and output GPIO probably can be skipped. Best regards, Krzysztof
