The vreg_misc_3p3 regulator is controlled by PMC8280_1 GPIO 2, not 1, on
the CRD.
Fixes: ccd3517faf18 ("arm64: dts: qcom: sc8280xp: Add reference device")
Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index b566e403d1db..b21b41a066b6 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -167,7 +167,7 @@ vreg_misc_3p3: regulator-misc-3p3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>;
+ gpio = <&pmc8280_1_gpios 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -757,7 +757,7 @@ edp_bl_reg_en: edp-bl-reg-en-state {
};
misc_3p3_reg_en: misc-3p3-reg-en-state {
- pins = "gpio1";
+ pins = "gpio2";
function = "normal";
};
};
--
2.25.1
