[PATCH v4 3/6] iommu/qcom: Disable and reset context bank before programming

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Writing	the new	TTBRs, TCRs and MAIRs on a previously enabled
context bank may trigger a context fault, resulting in firmware
driven AP resets: change the domain initialization programming
sequence to disable the context bank(s) and to also clear the
related fault address (CB_FAR) and fault status (CB_FSR)
registers before writing new values to TTBR0/1, TCR/TCR2, MAIR0/1.

Fixes: 0ae349a0f33f ("iommu/qcom: Add qcom_iommu")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
 drivers/iommu/arm/arm-smmu/qcom_iommu.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/iommu/arm/arm-smmu/qcom_iommu.c b/drivers/iommu/arm/arm-smmu/qcom_iommu.c
index b661b559ea01..8b48f7e8f3db 100644
--- a/drivers/iommu/arm/arm-smmu/qcom_iommu.c
+++ b/drivers/iommu/arm/arm-smmu/qcom_iommu.c
@@ -273,6 +273,13 @@ static int qcom_iommu_init_domain(struct iommu_domain *domain,
 			ctx->secure_init = true;
 		}
 
+		/* Disable context bank before programming */
+		iommu_writel(ctx, ARM_SMMU_CB_SCTLR, 0);
+
+		/* Clear context bank fault address fault status registers */
+		iommu_writel(ctx, ARM_SMMU_CB_FAR, 0);
+		iommu_writel(ctx, ARM_SMMU_CB_FSR, ARM_SMMU_FSR_FAULT);
+
 		/* TTBRs */
 		iommu_writeq(ctx, ARM_SMMU_CB_TTBR0,
 				pgtbl_cfg.arm_lpae_s1_cfg.ttbr |
-- 
2.40.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux