On 19/06/2023 16:36, Svyatoslav Ryhel wrote: > Document device tree schema which describes hot-pluggable via GPIO > i2c bus. > > Signed-off-by: Svyatoslav Ryhel <clamor95@xxxxxxxxx> > --- > .../bindings/i2c/i2c-hotplug-gpio.yaml | 68 +++++++++++++++++++ > 1 file changed, 68 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i2c/i2c-hotplug-gpio.yaml > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-hotplug-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-hotplug-gpio.yaml > new file mode 100644 > index 000000000000..74544687a2b8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/i2c/i2c-hotplug-gpio.yaml > @@ -0,0 +1,68 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/i2c/i2c-hotplug-gpio.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: GPIO detected hot-plugged I2C bus > + > +maintainers: > + - Michał Mirosław <mirq-linux@xxxxxxxxxxxx> > + > +description: | Do not need '|' unless you need to preserve formatting. > + Driver for hot-plugged I2C busses, where some devices on a bus > + are hot-pluggable and their presence is indicated by GPIO line. > + > +properties: > + $nodename: > + pattern: "^i2c-(.*)?" Drop > + > + compatible: > + items: > + - const: i2c-hotplug-gpio > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + interrupts-extended: > + minItems: 1 > + > + detect-gpios: > + maxItems: 1 > + > + i2c-parent: > + maxItems: 1 I don't understand this part. You built it as a complimentary device to the I2C controller, but there is no such device as "hotplug I2C", right? The GPIO is part of the controller and this is imaginary (virtual) device? Otherwise, where does the "detect-gpios" go? To the SoC? Then it is not a real device... > + > +required: > + - compatible > + - "#address-cells" > + - "#size-cells" Use consistent quotes (' or "). > + - interrupts-extended > + - detect-gpios > + - i2c-parent > + > +unevaluatedProperties: false > + > +examples: > + - | > + /* > + * Asus Transformers use I2C hotplug for attachable dock keyboard > + */ > + #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + > + i2c-dock { > + compatible = "i2c-hotplug-gpio"; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + interrupts-extended = <&gpio 164 IRQ_TYPE_EDGE_BOTH>; > + detect-gpios = <&gpio 164 1>; You forgot define. > + > + i2c-parent = <&{/i2c@7000c400}>; Use normal phandles/labels like entire DTS, not full paths or node names. > + }; > +... Best regards, Krzysztof
