On 16/06/23 23:58, Gregory CLEMENT wrote: > Gregory CLEMENT <gregory.clement@xxxxxxxxxxx> writes: > >> Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> writes: >> >>> Add YAML scheme for the Marvell's NAND controller >>> to validate it's DT bindings. Old txt file is deleted, >>> not included the compatibles and properties which were marked as >>> deprecated. >>> >>> Also fix node name in cp11x DTSI acording to nand-controller.yaml >>> >>> I've picked up this series to hopefully get it over the line. I think I've >>> addressed all the feedback from the last round of review. >>> >>> Vadym Kochan (2): >>> dt-bindings: mtd: marvell-nand: Convert to YAML DT scheme >>> arm64: dts: marvell: cp11x: Fix nand_controller node name according to >>> YAML >> >> Both patch applied on mvebu/dt64 >> >> However if the first patch should be merged through another tree, let me >> know. > Finally I removed these both patches, I missed the version 9! > > I applied the 2 patches for the dts files from v9. > > Thanks, > > Gregory Thanks and sorry for the confusion. There's a v10 on the way but I can drop out the dts changes from that now. >> >>> .../bindings/mtd/marvell,nand-controller.yaml | 190 ++++++++++++++++++ >>> .../devicetree/bindings/mtd/marvell-nand.txt | 126 ------------ >>> MAINTAINERS | 1 - >>> arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 2 +- >>> 4 files changed, 191 insertions(+), 128 deletions(-) >>> create mode 100644 Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml >>> delete mode 100644 Documentation/devicetree/bindings/mtd/marvell-nand.txt >>> >>> -- >>> 2.40.1 >>> >> -- >> Gregory Clement, Bootlin >> Embedded Linux and Kernel engineering >> http://scanmail.trustwave.com/?c=20988&d=0c6M5H8PBagWXDuSKsjbXpd1zLX-HHHRk3xSZOdFDw&u=http%3a%2f%2fbootlin%2ecom
