On 18/06/2023 15:22, niravkumar.l.rabara@xxxxxxxxx wrote:
> From: Niravkumar L Rabara <niravkumar.l.rabara@xxxxxxxxx>
>
> Add the initial device tree files for Intel's Agilex5 SoCFPGA platform.
>
> Signed-off-by: Adrian Ng Ho Yin <adrian.ho.yin.ng@xxxxxxxxx>
> Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@xxxxxxxxx>
> ---
> arch/arm64/boot/dts/intel/Makefile | 3 +
> .../arm64/boot/dts/intel/socfpga_agilex5.dtsi | 641 ++++++++++++++++++
> .../boot/dts/intel/socfpga_agilex5_socdk.dts | 184 +++++
> .../dts/intel/socfpga_agilex5_socdk_nand.dts | 131 ++++
> .../dts/intel/socfpga_agilex5_socdk_swvp.dts | 248 +++++++
> 5 files changed, 1207 insertions(+)
> create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
> create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
> create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts
> create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_swvp.dts
>
> diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
> index c2a723838344..bb74a7e30e58 100644
> --- a/arch/arm64/boot/dts/intel/Makefile
> +++ b/arch/arm64/boot/dts/intel/Makefile
> @@ -2,5 +2,8 @@
> dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \
> socfpga_agilex_socdk.dtb \
> socfpga_agilex_socdk_nand.dtb \
> + socfpga_agilex5_socdk.dtb \
> + socfpga_agilex5_socdk_nand.dtb \
> + socfpga_agilex5_socdk_swvp.dtb \
> socfpga_n5x_socdk.dtb
> dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
> diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
> new file mode 100644
> index 000000000000..9454d88d6457
> --- /dev/null
> +++ b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
> @@ -0,0 +1,641 @@
> +// SPDX-License-Identifier: GPL-2.0
Drop indent before license.
> +/*
> + * Copyright (C) 2023, Intel Corporation
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/reset/altr,rst-mgr-agilex5.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/clock/agilex5-clock.h>
> +
> +/ {
> + compatible = "intel,socfpga-agilex";
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + service_reserved: svcbuffer@0 {
> + compatible = "shared-dma-pool";
> + reg = <0x0 0x80000000 0x0 0x2000000>;
> + alignment = <0x1000>;
> + no-map;
> + };
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu@0 {
> + compatible = "arm,cortex-a55";
> + device_type = "cpu";
> + enable-method = "psci";
> + reg = <0x0>;
> + };
> +
> + cpu1: cpu@1 {
> + compatible = "arm,cortex-a55";
> + device_type = "cpu";
> + enable-method = "psci";
> + reg = <0x100>;
> + };
> +
> + cpu2: cpu@2 {
> + compatible = "arm,cortex-a76";
> + device_type = "cpu";
> + enable-method = "psci";
> + reg = <0x200>;
> + };
> +
> + cpu3: cpu@3 {
> + compatible = "arm,cortex-a76";
> + device_type = "cpu";
> + enable-method = "psci";
> + reg = <0x300>;
> + };
> + };
> +
> + psci {
> + compatible = "arm,psci-0.2";
> + method = "smc";
> + };
> +
> + intc: interrupt-controller@1d000000 {
> + compatible = "arm,gic-v3", "arm,cortex-a15-gic";
reg is always after compatible. Then ranges, if applicable.
> + #interrupt-cells = <3>;
> + #address-cells = <2>;
> + #size-cells =<2>;
> + interrupt-controller;
> + #redistributor-regions = <1>;
> + label = "GIC";
It does not look like you tested the DTS against bindings. Please run
`make dtbs_check` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).
> + status = "okay";
Drop, you don't need status.
> + ranges;
> + redistributor-stride = <0x0 0x20000>;
> + reg = <0x0 0x1d000000 0 0x10000>,
> + <0x0 0x1d060000 0 0x100000>;
> +
> + its: msi-controller@1d040000 {
> + compatible = "arm,gic-v3-its";
> + reg = <0x0 0x1d040000 0x0 0x20000>;
> + label = "ITS";
> + msi-controller;
> + status = "okay";
Drop
Anyway, entire node should be in soc. You clearly did not test it with
dtbs W=1. Neither with dtbs_check.
> + };
> + };
> +
> + /* Clock tree 5 main sources*/
> + clocks {
> + cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + };
> +
> + cb_intosc_ls_clk: cb-intosc-ls-clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + };
> +
> + f2s_free_clk: f2s-free-clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + };
> +
> + osc1: osc1 {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + };
> +
> + qspi_clk: qspi-clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <200000000>;
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupt-parent = <&intc>;
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + };
> +
> + usbphy0: usbphy {
> + #phy-cells = <0>;
> + compatible = "usb-nop-xceiv";
> + };
> +
> + soc {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> + device_type = "soc";
> + interrupt-parent = <&intc>;
> + ranges = <0 0 0 0xffffffff>;
> +
> + clkmgr: clock-controller@10d10000 {
> + compatible = "intel,agilex5-clkmgr";
> + reg = <0x10d10000 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + stmmac_axi_setup: stmmac-axi-config {
> + snps,wr_osr_lmt = <31>;
> + snps,rd_osr_lmt = <31>;
> + snps,blen = <0 0 0 32 16 8 4>;
> + };
> +
> + mtl_rx_setup: rx-queues-config {
These two nodes do not belong to SoC. Soc is for MMIO-based nodes.
> + snps,rx-queues-to-use = <8>;
> + snps,rx-sched-sp;
> + queue0 {
> + snps,dcb-algorithm;
> + snps,map-to-dma-channel = <0x0>;
> + };
> + queue1 {
> + snps,dcb-algorithm;
> + snps,map-to-dma-channel = <0x1>;
> + };
> + queue2 {
> + snps,dcb-algorithm;
> + snps,map-to-dma-channel = <0x2>;
> + };
> + queue3 {
> + snps,dcb-algorithm;
> + snps,map-to-dma-channel = <0x3>;
> + };
> + queue4 {
> + snps,dcb-algorithm;
> + snps,map-to-dma-channel = <0x4>;
> + };
> + queue5 {
> + snps,dcb-algorithm;
> + snps,map-to-dma-channel = <0x5>;
> + };
> + queue6 {
> + snps,dcb-algorithm;
> + snps,map-to-dma-channel = <0x6>;
> + };
> + queue7 {
> + snps,dcb-algorithm;
> + snps,map-to-dma-channel = <0x7>;
> + };
> + };
> +
> + mtl_tx_setup: tx-queues-config {
This as well
> + snps,tx-queues-to-use = <8>;
> + snps,tx-sched-wrr;
> + queue0 {
> + snps,weight = <0x09>;
> + snps,dcb-algorithm;
> + };
> + queue1 {
> + snps,weight = <0x0A>;
> + snps,dcb-algorithm;
> + };
> + queue2 {
> + snps,weight = <0x0B>;
> + snps,dcb-algorithm;
> + };
> + queue3 {
> + snps,weight = <0x0C>;
> + snps,dcb-algorithm;
> + };
> + queue4 {
> + snps,weight = <0x0D>;
> + snps,dcb-algorithm;
> + };
> + queue5 {
> + snps,weight = <0x0E>;
> + snps,dcb-algorithm;
> + };
> + queue6 {
> + snps,weight = <0x0F>;
> + snps,dcb-algorithm;
> + };
> + queue7 {
> + snps,weight = <0x10>;
> + snps,dcb-algorithm;
> + };
> + };
> +
> + gmac0: ethernet@10810000 {
> + compatible = "altr,socfpga-stmmac-a10-s10",
> + "snps,dwxgmac-2.10",
> + "snps,dwxgmac";
You have broken alignment.
> + reg = <0x10810000 0x3500>;
> + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
In multiple places. Really.
> + <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "macirq",
> + "macirq_tx0",
This is ugly.
> + "macirq_tx1",
> + "macirq_tx2",
> + "macirq_tx3",
> + "macirq_tx4",
> + "macirq_tx5",
> + "macirq_tx6",
> + "macirq_tx7",
> + "macirq_rx0",
> + "macirq_rx1",
> + "macirq_rx2",
> + "macirq_rx3",
> + "macirq_rx4",
> + "macirq_rx5",
> + "macirq_rx6",
> + "macirq_rx7";
> + mac-address = [00 00 00 00 00 00];
Drop, it's SoC file.
> + resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
> + reset-names = "stmmaceth", "stmmaceth-ocp";
> + tx-fifo-depth = <32768>;
> + rx-fifo-depth = <16384>;
> + snps,multicast-filter-bins = <64>;
> + snps,perfect-filter-entries = <64>;
> + snps,axi-config = <&stmmac_axi_setup>;
> + snps,mtl-rx-config = <&mtl_rx_setup>;
> + snps,mtl-tx-config = <&mtl_tx_setup>;
> + snps,pbl = <32>;
> + snps,pblx8;
> + snps,multi-irq-en;
> + snps,tso;
> + altr,sysmgr-syscon = <&sysmgr 0x44 0>;
> + altr,smtg-hub;
> + snps,rx-vlan-offload;
> + clocks = <&clkmgr AGILEX5_EMAC0_CLK>, <&clkmgr AGILEX5_EMAC_PTP_CLK>;
> + clock-names = "stmmaceth", "ptp_ref";
> + status = "disabled";
> + };
> +
> + i2c0: i2c@10c02800 {
> + #address-cells = <1>;
> + #size-cells = <0>;
compatible first, reg second.
> + compatible = "snps,designware-i2c";
> + reg = <0x10c02800 0x100>;
> + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> + resets = <&rst I2C0_RESET>;
> + clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c@10c02900 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,designware-i2c";
> + reg = <0x10c02900 0x100>;
> + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
> + resets = <&rst I2C1_RESET>;
> + clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c@10c02a00 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,designware-i2c";
> + reg = <0x10c02a00 0x100>;
> + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
> + resets = <&rst I2C2_RESET>;
> + clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
> + status = "disabled";
> + };
> +
> + i2c3: i2c@10c02b00 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,designware-i2c";
> + reg = <0x10c02b00 0x100>;
> + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
> + resets = <&rst I2C3_RESET>;
> + clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
> + status = "disabled";
> + };
> +
> + i2c4: i2c@10c02c00 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,designware-i2c";
> + reg = <0x10c02c00 0x100>;
> + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
> + resets = <&rst I2C4_RESET>;
> + clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
> + status = "disabled";
> + };
> +
> + i3c0: i3c@10da0000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dw-i3c-master-1.00a";
> + reg = <0x10da0000 0x1000>;
> + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
> + resets = <&rst I3C0_RESET>;
> + clocks = <&clkmgr AGILEX5_L4_MP_CLK>;
> + status = "disabled";
> + };
> +
> + i3c1: i3c@10da1000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dw-i3c-master-1.00a";
> + reg = <0x10da1000 0x1000>;
> + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
> + resets = <&rst I3C1_RESET>;
> + clocks = <&clkmgr AGILEX5_L4_MP_CLK>;
> + status = "disabled";
> + };
> +
> + gpio1: gpio@10C03300 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dw-apb-gpio";
> + reg = <0x10C03300 0x100>;
> + resets = <&rst GPIO1_RESET>;
> + status = "disabled";
> +
> + portb: gpio-controller@0 {
> + compatible = "snps,dw-apb-gpio-port";
> + gpio-controller;
> + #gpio-cells = <2>;
> + snps,nr-gpios = <24>;
> + reg = <0>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> + mmc: mmc0@10808000 {
It does not look like you tested the DTS against bindings. Please run
`make dtbs_check` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).
Sorry, but your DTS lacks any basic (internal!) review and basic tests
with automated tools.
..
> + spi0: spi@10da4000 {
> + compatible = "snps,dw-apb-ssi";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x10da4000 0x1000>;
> + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
> + resets = <&rst SPIM0_RESET>;
> + reset-names = "spi";
> + reg-io-width = <4>;
> + num-cs = <4>;
> + clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>;
> + dmas = <&dmac0 2>, <&dmac0 3>;
> + dma-names ="tx", "rx";
> +
> + status = "disabled";
> +
> + flash: m25p128@0 {
It's getting worse...
> + status = "okay";
and worse
> + compatible = "st,m25p80";
> + spi-max-frequency = <25000000>;
> + m25p,fast-read;
> + reg = <0>;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition@0 {
> + label = "spi_flash_part0";
> + reg = <0x0 0x100000>;
and less conforming to style
> + };
> + };
> +
... and less.
...
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + bootargs = "console=uart8250,mmio32,0x10c02000,115200n8 \
> + root=/dev/ram0 rw initrd=0x10000000 init=/sbin/init \
> + ramdisk_size=10000000 earlycon=uart8250,mmio32,0x10c02000,115200n8 \
> + panic=-1 nosmp rootfstype=ext3";
NAK. Drop entire bootags.
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + hps0 {
No, srsly? So all our cleanups for few years mean nothing?
Best regards,
Krzysztof
