Krzysztof Kozlowski писал(а) 17.06.2023 22:15:
> ADC channel node names were changed to require generic 'channel'. The
> user-visible part is defined via label.
>
> sc7180-acer-aspire1.dtb: adc@3100: 'charger-thermistor@4f', 'thermistor@4e' do not match any of the regexes: '^channel@[0-9a-f]+$', 'pinctrl-[0-9]+'
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Thanks for fixing this up!
Reviewed-by: Nikita Travkin <nikita@xxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
> index b637b4270f88..dbb48934d499 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
> @@ -314,16 +314,18 @@ &mdss_dsi0_phy {
> };
>
> &pm6150_adc {
> - thermistor@4e {
> + channel@4e {
> reg = <ADC5_AMUX_THM2_100K_PU>;
> qcom,ratiometric;
> qcom,hw-settle-time = <200>;
> + label = "thermistor";
> };
>
> - charger-thermistor@4f {
> + channel@4f {
> reg = <ADC5_AMUX_THM3_100K_PU>;
> qcom,ratiometric;
> qcom,hw-settle-time = <200>;
> + label = "charger_thermistor";
> };
> };
