The pinctrl node was missing which change the pin mux to GPIO mode. Add
it.
Fixes: 79d83b3a458e ("ARM: dts: lan966x: add basic Kontron KSwitch D10 support")
Signed-off-by: Michael Walle <mwalle@xxxxxxxxxx>
---
arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
index 0097e72e3fb2..f86e2e751403 100644
--- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
+++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
@@ -17,6 +17,8 @@ chosen {
};
gpio-restart {
+ pinctrl-0 = <&reset_pins>;
+ pinctrl-names = "default";
compatible = "gpio-restart";
gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
priority = <200>;
@@ -59,6 +61,12 @@ miim_c_pins: miim-c-pins {
function = "miim_c";
};
+ reset_pins: reset-pins {
+ /* SYS_RST# */
+ pins = "GPIO_56";
+ function = "gpio";
+ };
+
sgpio_a_pins: sgpio-a-pins {
/* SCK, D0, D1 */
pins = "GPIO_32", "GPIO_33", "GPIO_34";
--
2.30.2
