From: Alex Leibovich <alexl@xxxxxxxxxxx>
Add support for the AP807 die thermal data. This is the same as AP806,
except for the coefficients.
ap807 values taken from TSENSE_ADC_16FFC spec, which says:
T(in Celsius) = T(code)*TSENE_GAIN+TSENE_OFFSET
where in default:
TSENE_OFFSET = 128.9
TSENE_GAIN = 0.394
Signed-off-by: Alex Leibovich <alexl@xxxxxxxxxxx>
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@xxxxxxxxxxx>
Reviewed-by: Stefan Chulski <stefanc@xxxxxxxxxxx>
Signed-off-by: Russell King (Oracle) <rmk+kernel@xxxxxxxxxxxxxxx>
---
drivers/thermal/armada_thermal.c | 32 ++++++++++++++++++++++++++++++--
1 file changed, 30 insertions(+), 2 deletions(-)
diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
index 2efc222a379b..f64c2b508542 100644
--- a/drivers/thermal/armada_thermal.c
+++ b/drivers/thermal/armada_thermal.c
@@ -231,7 +231,7 @@ static void armada380_init(struct platform_device *pdev,
regmap_write(priv->syscon, data->syscon_control0_off, reg);
}
-static void armada_ap806_init(struct platform_device *pdev,
+static void armada_ap80x_init(struct platform_device *pdev,
struct armada_thermal_priv *priv)
{
struct armada_thermal_data *data = priv->data;
@@ -620,7 +620,7 @@ static const struct armada_thermal_data armada380_data = {
};
static const struct armada_thermal_data armada_ap806_data = {
- .init = armada_ap806_init,
+ .init = armada_ap80x_init,
.is_valid_bit = BIT(16),
.temp_shift = 0,
.temp_mask = 0x3ff,
@@ -643,6 +643,30 @@ static const struct armada_thermal_data armada_ap806_data = {
.cpu_nr = 4,
};
+static const struct armada_thermal_data armada_ap807_data = {
+ .init = armada_ap80x_init,
+ .is_valid_bit = BIT(16),
+ .temp_shift = 0,
+ .temp_mask = 0x3ff,
+ .thresh_shift = 3,
+ .hyst_shift = 19,
+ .hyst_mask = 0x3,
+ .coef_b = -128900LL,
+ .coef_m = 394ULL,
+ .coef_div = 1,
+ .inverted = true,
+ .signed_sample = true,
+ .syscon_control0_off = 0x84,
+ .syscon_control1_off = 0x88,
+ .syscon_status_off = 0x8C,
+ .dfx_irq_cause_off = 0x108,
+ .dfx_irq_mask_off = 0x10C,
+ .dfx_overheat_irq = BIT(22),
+ .dfx_server_irq_mask_off = 0x104,
+ .dfx_server_irq_en = BIT(1),
+ .cpu_nr = 4,
+};
+
static const struct armada_thermal_data armada_cp110_data = {
.init = armada_cp110_init,
.is_valid_bit = BIT(10),
@@ -686,6 +710,10 @@ static const struct of_device_id armada_thermal_id_table[] = {
.compatible = "marvell,armada-ap806-thermal",
.data = &armada_ap806_data,
},
+ {
+ .compatible = "marvell,armada-ap807-thermal",
+ .data = &armada_ap807_data,
+ },
{
.compatible = "marvell,armada-cp110-thermal",
.data = &armada_cp110_data,
--
2.30.2
