The Khadas VIM4 uses the Amlogic A311D2 SoC, based on the Amlogic Meson T7 SoC family. This chip is not the same as A311D used in Vim3 board. Work based on Khadas 5.4 branch: https://github.com/khadas/linux/tree/khadas-vims-5.4.y Board Features: - 8GB LPDDR4X 2016MHz - 32GB eMMC 5.1 storage - 32MB SPI flash - 10/100/1000 Base-T Ethernet - AP6275S Wireless (802.11 a/b/g/n/ac/ax, BT5.1) - HDMI 2.1 video - HDMI Input - 1x USB 2.0 + 1x USB 3.0 ports - 1x USB-C (power) with USB 2.0 OTG - 3x LED's (1x red, 1x blue, 1x white) - 3x buttons (power, function, reset) - M2 socket with PCIe, USB, ADC & I2C - 40pin GPIO Header - 1x micro SD card slot Lucas Tanure (6): dt-bindings: arm: amlogic: add Amlogic T7 based Khadas VIM4 bindings dt-bindings: clock: Bindings for Meson T7 clock controller clk: meson: t7: add peripheral clock controller dt-bindings: serial: amlogic, meson-uart: support T7 tty: serial: meson: Added T7 SOC compatibility arm64: dts: meson-t7-a311d2-khadas-vim4: add initial device-tree .../devicetree/bindings/arm/amlogic.yaml | 7 + .../bindings/clock/amlogic,mesont7.yaml | 69 + .../bindings/serial/amlogic,meson-uart.yaml | 1 + arch/arm64/boot/dts/amlogic/Makefile | 1 + .../amlogic/meson-t7-a311d2-khadas-vim4.dts | 112 + arch/arm64/boot/dts/amlogic/meson-t7.dtsi | 202 + drivers/clk/meson/Kconfig | 17 + drivers/clk/meson/Makefile | 1 + drivers/clk/meson/t7.c | 8014 +++++++++++++++++ drivers/clk/meson/t7.h | 235 + drivers/tty/serial/meson_uart.c | 4 + include/dt-bindings/clock/mesont7-clkc.h | 487 + 12 files changed, 9150 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml create mode 100644 arch/arm64/boot/dts/amlogic/meson-t7-a311d2-khadas-vim4.dts create mode 100644 arch/arm64/boot/dts/amlogic/meson-t7.dtsi create mode 100644 drivers/clk/meson/t7.c create mode 100644 drivers/clk/meson/t7.h create mode 100644 include/dt-bindings/clock/mesont7-clkc.h -- 2.41.0
