Use assigned-clock-rates property for configuring the QUP I2C core clocks to operate at nominal frequency. Signed-off-by: Devi Priya <quic_devipriy@xxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/ipq9574.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi index 0baeb10bbdae..78bf7f9c455a 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -361,6 +361,8 @@ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + assigned-clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + assigned-clock-rates = <50000000>; dmas = <&blsp_dma 14>, <&blsp_dma 15>; dma-names = "tx", "rx"; status = "disabled"; @@ -389,6 +391,8 @@ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + assigned-clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; + assigned-clock-rates = <50000000>; dmas = <&blsp_dma 16>, <&blsp_dma 17>; dma-names = "tx", "rx"; status = "disabled"; @@ -417,6 +421,8 @@ clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + assigned-clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; + assigned-clock-rates = <50000000>; dmas = <&blsp_dma 18>, <&blsp_dma 19>; dma-names = "tx", "rx"; status = "disabled"; @@ -446,6 +452,8 @@ clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + assigned-clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; + assigned-clock-rates = <50000000>; dmas = <&blsp_dma 20>, <&blsp_dma 21>; dma-names = "tx", "rx"; status = "disabled"; -- 2.17.1
