On 03.06.2023 23:02, Varshini Rajendran wrote: > Add config flag for sam9x7 SoC > > Signed-off-by: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx> > --- > arch/arm/mach-at91/Kconfig | 21 +++++++++++++++++++-- > 1 file changed, 19 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig > index 3dd9e718661b..4463afd7298a 100644 > --- a/arch/arm/mach-at91/Kconfig > +++ b/arch/arm/mach-at91/Kconfig > @@ -143,11 +143,28 @@ config SOC_SAM9X60 > help > Select this if you are using Microchip's SAM9X60 SoC > > +config SOC_SAM9X7 > + bool "SAM9X7" > + depends on ARCH_MULTI_V5 > + select ATMEL_AIC5_IRQ > + select ATMEL_PM if PM > + select ATMEL_SDRAMC > + select CPU_ARM926T > + select HAVE_AT91_USB_CLK > + select HAVE_AT91_GENERATED_CLK > + select HAVE_AT91_SAM9X60_PLL > + select MEMORY > + select PINCTRL_AT91 > + select SOC_SAM_V4_V5 > + select SRAM if PM > + help > + Select this if you are using Microchip's SAM9X7 SoC > + > comment "Clocksource driver selection" > > config ATMEL_CLOCKSOURCE_PIT > bool "Periodic Interval Timer (PIT) support" > - depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5 > + depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5 > default SOC_AT91SAM9 || SOC_SAMA5 > select ATMEL_PIT > help > @@ -157,7 +174,7 @@ config ATMEL_CLOCKSOURCE_PIT > > config ATMEL_CLOCKSOURCE_TCB > bool "Timer Counter Blocks (TCB) support" > - default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5 > + default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5 You should also take into account PIT64B available in this file after TCB. > select ATMEL_TCB_CLKSRC > help > Select this to get a high precision clocksource based on a
