Il 15/06/23 08:01, Shawn Sung (宋孝謙) ha scritto:
Hi Angelo,
Got it. Will fix this in the next version.
Added a new define in mtk-mmsys.h:
#define MMSYS_RST_NR(bank, bit) ((bank * 32) + bit)
And define the reset table as:
static const u8 mmsys_mt8188_vdo1_rst_tb[] = {
[MT8188_VDO1_RST_SMI_LARB2] = MMSYS_RST_NR(0, 0),
...
[MT8188_VDO1_RST_VPP_MERGE2] = MMSYS_RST_NR(0, 11),
[MT8188_VDO1_RST_VPP_MERGE3] = MMSYS_RST_NR(1, 0),
...
[MT8188_VDO1_RST_DISP_RSZ3] = MMSYS_RST_NR(1, 31),
[MT8188_VDO1_RST_HDR_VDO_FE0] = MMSYS_RST_NR(2, 0),
...
[MT8188_VDO1_RST_HDR_VDO_BE_DL_ASYNC] = MMSYS_RST_NR(2, 23),
};
Okay, that's also good. Go on!
Regards,
Angelo
Thanks,
Hsiao Chien Sung
On Wed, 2023-06-14 at 13:35 +0200, AngeloGioacchino Del Regno wrote:
External email : Please do not click links or open attachments until
you have verified the sender or the content.
Il 14/06/23 09:31, Hsiao Chien Sung ha scritto:
Add MT8188 VDO1 reset bit map.
Signed-off-by: Hsiao Chien Sung <shawn.sung@xxxxxxxxxxxx>
---
drivers/soc/mediatek/mt8188-mmsys.h | 57
+++++++++++++++++++++++++++++
drivers/soc/mediatek/mtk-mmsys.c | 3 +-
2 files changed, 59 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/mediatek/mt8188-mmsys.h
b/drivers/soc/mediatek/mt8188-mmsys.h
index c3e3c5cfe931..208d4dfedc1a 100644
--- a/drivers/soc/mediatek/mt8188-mmsys.h
+++ b/drivers/soc/mediatek/mt8188-mmsys.h
@@ -144,6 +144,63 @@ static const u8 mmsys_mt8188_vdo0_rst_tb[] = {
[MT8188_VDO0_RST_DISP_RSZ0]= 31,
};
+static const u8 mmsys_mt8188_vdo1_rst_tb[] = {
+[MT8188_VDO1_RST_SMI_LARB2]= 0,
+[MT8188_VDO1_RST_SMI_LARB3]= 1,
+[MT8188_VDO1_RST_GALS]= 2,
+[MT8188_VDO1_RST_FAKE_ENG0]= 3,
+[MT8188_VDO1_RST_FAKE_ENG1]= 4,
+[MT8188_VDO1_RST_MDP_RDMA0]= 5,
+[MT8188_VDO1_RST_MDP_RDMA1]= 6,
+[MT8188_VDO1_RST_MDP_RDMA2]= 7,
+[MT8188_VDO1_RST_MDP_RDMA3]= 8,
+[MT8188_VDO1_RST_VPP_MERGE0]= 9,
+[MT8188_VDO1_RST_VPP_MERGE1]= 10,
+[MT8188_VDO1_RST_VPP_MERGE2]= 11,
+[MT8188_VDO1_RST_VPP_MERGE3]= 32 + 0,
Works, but there's a better way.
32 + 0 means that you're using reset SW1 register, so you can do
#define MT8188_MMSYS_RST_NR_PER_BANK32
#define MT8188_RST_SW1_OFFSETMT8188_MMSYS_RST_NR_PER_BANK
#define MT8188_RST_SW2_OFFSETMT8188_MMSYS_RST_NR_PER_BANK * 2
[MT8188_VDO1_RST_VPP_MERGE3] = MT8188_RST_SW1_OFFSET + 0
[MT8188_VDO1_RST_VPP_MERGE4] = MT8188_RST_SW1_OFFSET + 0
.......
[MT8188_VDO1_RST_HDR_VDO_FE0] = MT8188_RST_SW2_OFFSET + 0
...etc
Reading this will make it clear that a certain reset bit is in a
different
(sequential or not) register.
P.S.: If the RST_NR_PER_BANK is *not* MT8188 specific (as in, all
reset registers
for all SoCs are always 32 bits, which I believe is true), you could
move that
definition to mtk-mmsys.h as
#define MMSYS_RST_NR_PER_BANK32
and then define the offsets in mt8188-mmsys.h as
#define MT8188_RST_SW1_OFFSET MMSYS_RST_NR_PER_BANK
.... etc
Thanks,
Angelo
