[PATCH 1/4] arm64: dts: qcom: sm8250-edo: Add gpio line names for TLMM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).

Add these to the PDX203&206 DTSIs to better document the hardware.

Diff between 203 and 206:
<                         "CAM_PWR_A_CS",
>                         "FRONTC_PWR_EN",
<                         "CAM4_MCLK",
<                         "TOF_RST_N",
>                         "NC",
>                         "NC",
<                         "WLC_I2C_SDA",
<                         "WLC_I2C_SCL", /* GPIO_120 */
>                         "NC",
>                         "NC",
<                         "WLC_INT_N",
>                         "NC",

Which makes sense, as 203 has a 3D iToF, slightly different camera
power wiring and WLC (WireLess Charging).

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 .../dts/qcom/sm8250-sony-xperia-edo-pdx203.dts     | 183 +++++++++++++++++++++
 .../dts/qcom/sm8250-sony-xperia-edo-pdx206.dts     | 183 +++++++++++++++++++++
 2 files changed, 366 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
index 356a81698731..84104d2b2010 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
@@ -14,3 +14,186 @@ / {
 };
 
 /delete-node/ &vreg_l7f_1p8;
+
+&tlmm {
+	gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
+			  "MDM2AP_ERR_FATAL",
+			  "AP_CTI_OUT",
+			  "MDM2AP_STATUS",
+			  "NFC_I2C_SDA",
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "NFC_ESE_PWR_REQ",
+			  "DVDT_WRT_DET_AND",
+			  "SPK_AMP_RESET_N", /* GPIO_10 */
+			  "SPK_AMP_INT_N",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "NC",
+			  "TX_GTR_THRES_IN",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX",
+			  "HST_BT_UART_RX",
+			  "HST_WLAN_EN", /* GPIO_20 */
+			  "HST_BT_EN",
+			  "RGBC_IR_PWR_EN",
+			  "FP_INT_N",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_SCLK", /* GPIO_30 */
+			  "NFC_ESE_SPI_CS_N",
+			  "WCD_RST_N",
+			  "NC",
+			  "SDM_DEBUG_UART_TX",
+			  "SDM_DEBUG_UART_RX",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "TS_INT_N",
+			  "FP_SPI_MISO", /* GPIO_40 */
+			  "FP_SPI_MOSI",
+			  "FP_SPI_SCLK",
+			  "FP_SPI_CS_N",
+			  "APPS_I2C_0_SDA",
+			  "APPS_I2C_0_SCL",
+			  "DISP_ERR_FG",
+			  "UIM2_DETECT_EN",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_50 */
+			  "NC",
+			  "MDM_UART_CTS",
+			  "MDM_UART_RFR",
+			  "MDM_UART_TX",
+			  "MDM_UART_RX",
+			  "AP2MDM_STATUS",
+			  "AP2MDM_ERR_FATAL",
+			  "MDM_IPC_HS_UART_TX",
+			  "MDM_IPC_HS_UART_RX",
+			  "NC", /* GPIO_60 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "USB_CC_DIR",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "CAM_PWR_B_CS",
+			  "NC", /* GPIO_70 */
+			  "CAM_PWR_A_CS",
+			  "SBU_SW_SEL",
+			  "SBU_SW_OE",
+			  "FP_RESET_N",
+			  "FP_RESET_N",
+			  "DISP_RESET_N",
+			  "DEBUG_GPIO0",
+			  "TRAY_DET",
+			  "CAM2_RST_N",
+			  "PCIE0_RST_N",
+			  "PCIE0_CLK_REQ_N", /* GPIO_80 */
+			  "PCIE0_WAKE_N",
+			  "DVDT_ENABLE",
+			  "DVDT_WRT_DET_OR",
+			  "NC",
+			  "PCIE2_RST_N",
+			  "PCIE2_CLK_REQ_N",
+			  "PCIE2_WAKE_N",
+			  "MDM_VFR_IRQ0",
+			  "MDM_VFR_IRQ1",
+			  "SW_SERVICE", /* GPIO_90 */
+			  "CAM_SOF",
+			  "CAM1_RST_N",
+			  "CAM0_RST_N",
+			  "CAM0_MCLK",
+			  "CAM1_MCLK",
+			  "CAM2_MCLK",
+			  "CAM3_MCLK",
+			  "CAM4_MCLK",
+			  "TOF_RST_N",
+			  "NC", /* GPIO_100 */
+			  "CCI0_I2C_SDA",
+			  "CCI0_I2C_SCL",
+			  "CCI1_I2C_SDA",
+			  "CCI1_I2C_SCL_",
+			  "CCI2_I2C_SDA",
+			  "CCI2_I2C_SCL",
+			  "CCI3_I2C_SDA",
+			  "CCI3_I2C_SCL",
+			  "CAM3_RST_N",
+			  "NFC_DWL_REQ", /* GPIO_110 */
+			  "NFC_IRQ",
+			  "XVS",
+			  "NC",
+			  "RF_ID_EXTENSION",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "WLC_I2C_SDA",
+			  "WLC_I2C_SCL", /* GPIO_120 */
+			  "ACC_COVER_OPEN",
+			  "ALS_PROX_INT_N",
+			  "ACCEL_INT",
+			  "WLAN_SW_CTRL",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "UDON_SWITCH_SEL",
+			  "WDOG_DISABLE",
+			  "BAROMETER_INT",
+			  "NC", /* GPIO_130 */
+			  "NC",
+			  "FORCED_USB_BOOT",
+			  "NC",
+			  "NC",
+			  "WLC_INT_N",
+			  "NC",
+			  "NC",
+			  "RGBC_IR_INT",
+			  "NC",
+			  "NC", /* GPIO_140 */
+			  "NC",
+			  "BT_SLIMBUS_CLK",
+			  "BT_SLIMBUS_DATA",
+			  "HW_ID_0",
+			  "HW_ID_1",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0", /* GPIO_150 */
+			  "WCD_SWR_RX_DATA1",
+			  "SDM_DMIC_CLK1",
+			  "SDM_DMIC_DATA1",
+			  "SDM_DMIC_CLK2",
+			  "SDM_DMIC_DATA2",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "SPK_AMP_I2S_ASP_DIN",
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "COMPASS_I2C_SDA", /* GPIO_160 */
+			  "COMPASS_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "SSC_SPI_1_MISO",
+			  "SSC_SPI_1_MOSI",
+			  "SSC_SPI_1_CLK",
+			  "SSC_SPI_1_CS_N",
+			  "NC",
+			  "NC",
+			  "SSC_SENSOR_I2C_SDA", /* GPIO_170 */
+			  "SSC_SENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HST_BLE_SNS_UART6_TX",
+			  "HST_BLE_SNS_UART6_RX",
+			  "HST_WLAN_UART_TX",
+			  "HST_WLAN_UART_RX";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
index 01fe3974ee72..fae6568cb79e 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
@@ -30,6 +30,189 @@ g-assist-key {
 	};
 };
 
+&tlmm {
+	gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
+			  "MDM2AP_ERR_FATAL",
+			  "AP_CTI_OUT",
+			  "MDM2AP_STATUS",
+			  "NFC_I2C_SDA",
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "NFC_ESE_PWR_REQ",
+			  "DVDT_WRT_DET_AND",
+			  "SPK_AMP_RESET_N", /* GPIO_10 */
+			  "SPK_AMP_INT_N",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "NC",
+			  "TX_GTR_THRES_IN",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX",
+			  "HST_BT_UART_RX",
+			  "HST_WLAN_EN", /* GPIO_20 */
+			  "HST_BT_EN",
+			  "RGBC_IR_PWR_EN",
+			  "FP_INT_N",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_SCLK", /* GPIO_30 */
+			  "NFC_ESE_SPI_CS_N",
+			  "WCD_RST_N",
+			  "NC",
+			  "SDM_DEBUG_UART_TX",
+			  "SDM_DEBUG_UART_RX",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "TS_INT_N",
+			  "FP_SPI_MISO", /* GPIO_40 */
+			  "FP_SPI_MOSI",
+			  "FP_SPI_SCLK",
+			  "FP_SPI_CS_N",
+			  "APPS_I2C_0_SDA",
+			  "APPS_I2C_0_SCL",
+			  "DISP_ERR_FG",
+			  "UIM2_DETECT_EN",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_50 */
+			  "NC",
+			  "MDM_UART_CTS",
+			  "MDM_UART_RFR",
+			  "MDM_UART_TX",
+			  "MDM_UART_RX",
+			  "AP2MDM_STATUS",
+			  "AP2MDM_ERR_FATAL",
+			  "MDM_IPC_HS_UART_TX",
+			  "MDM_IPC_HS_UART_RX",
+			  "NC", /* GPIO_60 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "USB_CC_DIR",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "CAM_PWR_B_CS",
+			  "NC", /* GPIO_70 */
+			  "FRONTC_PWR_EN",
+			  "SBU_SW_SEL",
+			  "SBU_SW_OE",
+			  "FP_RESET_N",
+			  "FP_RESET_N",
+			  "DISP_RESET_N",
+			  "DEBUG_GPIO0",
+			  "TRAY_DET",
+			  "CAM2_RST_N",
+			  "PCIE0_RST_N",
+			  "PCIE0_CLK_REQ_N", /* GPIO_80 */
+			  "PCIE0_WAKE_N",
+			  "DVDT_ENABLE",
+			  "DVDT_WRT_DET_OR",
+			  "NC",
+			  "PCIE2_RST_N",
+			  "PCIE2_CLK_REQ_N",
+			  "PCIE2_WAKE_N",
+			  "MDM_VFR_IRQ0",
+			  "MDM_VFR_IRQ1",
+			  "SW_SERVICE", /* GPIO_90 */
+			  "CAM_SOF",
+			  "CAM1_RST_N",
+			  "CAM0_RST_N",
+			  "CAM0_MCLK",
+			  "CAM1_MCLK",
+			  "CAM2_MCLK",
+			  "CAM3_MCLK",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_100 */
+			  "CCI0_I2C_SDA",
+			  "CCI0_I2C_SCL",
+			  "CCI1_I2C_SDA",
+			  "CCI1_I2C_SCL_",
+			  "CCI2_I2C_SDA",
+			  "CCI2_I2C_SCL",
+			  "CCI3_I2C_SDA",
+			  "CCI3_I2C_SCL",
+			  "CAM3_RST_N",
+			  "NFC_DWL_REQ", /* GPIO_110 */
+			  "NFC_IRQ",
+			  "XVS",
+			  "NC",
+			  "RF_ID_EXTENSION",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "ACC_COVER_OPEN",
+			  "ALS_PROX_INT_N",
+			  "ACCEL_INT",
+			  "WLAN_SW_CTRL",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "UDON_SWITCH_SEL",
+			  "WDOG_DISABLE",
+			  "BAROMETER_INT",
+			  "NC", /* GPIO_130 */
+			  "NC",
+			  "FORCED_USB_BOOT",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RGBC_IR_INT",
+			  "NC",
+			  "NC", /* GPIO_140 */
+			  "NC",
+			  "BT_SLIMBUS_CLK",
+			  "BT_SLIMBUS_DATA",
+			  "HW_ID_0",
+			  "HW_ID_1",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0", /* GPIO_150 */
+			  "WCD_SWR_RX_DATA1",
+			  "SDM_DMIC_CLK1",
+			  "SDM_DMIC_DATA1",
+			  "SDM_DMIC_CLK2",
+			  "SDM_DMIC_DATA2",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "SPK_AMP_I2S_ASP_DIN",
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "COMPASS_I2C_SDA", /* GPIO_160 */
+			  "COMPASS_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "SSC_SPI_1_MISO",
+			  "SSC_SPI_1_MOSI",
+			  "SSC_SPI_1_CLK",
+			  "SSC_SPI_1_CS_N",
+			  "NC",
+			  "NC",
+			  "SSC_SENSOR_I2C_SDA", /* GPIO_170 */
+			  "SSC_SENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HST_BLE_SNS_UART6_TX",
+			  "HST_BLE_SNS_UART6_RX",
+			  "HST_WLAN_UART_TX",
+			  "HST_WLAN_UART_RX";
+};
+
 &vreg_l2f_1p3 {
 	regulator-min-microvolt = <1200000>;
 	regulator-max-microvolt = <1200000>;

-- 
2.41.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux