On 12.06.2023 11:23, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
>
> Add the MDC and MDIO pin functions for ethernet0 on sa8775p-ride.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
> arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> index 7754788ea775..dbd9553aa5c7 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> @@ -370,6 +370,22 @@ &spi16 {
> };
>
> &tlmm {
> + ethernet0_default: ethernet0-default-state {
> + ethernet0_mdc: ethernet0-mdc-pins {
> + pins = "gpio8";
> + function = "emac0_mdc";
> + drive-strength = <16>;
> + bias-pull-up;
> + };
> +
> + ethernet0_mdio: ethernet0-mdio-pins {
> + pins = "gpio9";
> + function = "emac0_mdio";
> + drive-strength = <16>;
> + bias-pull-up;
> + };
> + };
> +
> qup_uart10_default: qup-uart10-state {
> pins = "gpio46", "gpio47";
> function = "qup1_se3";
