Re: [PATCH v5 2/7] dt-bindings: soc: starfive: Add StarFive syscon module

[Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>]

On 13/06/2023 14:58, Xingyu Wu wrote:
> From: William Qiu <william.qiu@xxxxxxxxxxxxxxxx>
> 
> Add documentation to describe StarFive System Controller Registers.
> 
> Co-developed-by: Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>
> Signed-off-by: Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>
> Signed-off-by: William Qiu <william.qiu@xxxxxxxxxxxxxxxx>
> ---
>  .../soc/starfive/starfive,jh7110-syscon.yaml  | 62 +++++++++++++++++++
>  MAINTAINERS                                   |  7 +++
>  2 files changed, 69 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
> 
> diff --git a/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
> new file mode 100644
> index 000000000000..a81190f8a54d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/starfive/starfive,jh7110-syscon.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive JH7110 SoC system controller
> +
> +maintainers:
> +  - William Qiu <william.qiu@xxxxxxxxxxxxxxxx>
> +
> +description: |
> +  The StarFive JH7110 SoC system controller provides register information such
> +  as offset, mask and shift to configure related modules such as MMC and PCIe.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - const: starfive,jh7110-sys-syscon
> +          - const: syscon
> +          - const: simple-mfd
> +      - items:
> +          - enum:
> +              - starfive,jh7110-aon-syscon
> +              - starfive,jh7110-stg-syscon
> +          - const: syscon
> +
> +  reg:
> +    maxItems: 1
> +
> +  clock-controller:
> +    $ref: /schemas/clock/starfive,jh7110-pll.yaml#
> +    type: object
> +
> +  "#power-domain-cells":
> +    const: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: starfive,jh7110-aon-syscon
> +    then:
> +      required:
> +        - "#power-domain-cells"

Where did you implement the results of the discussion that only some
devices can have power and clock controller?

According to your code all of above - sys, aon and stg - have clock and
power controllers. If not, then the code is not correct, so please do
not respond with what is where (like you did last time) but actually
implement what you say.

Best regards,
Krzysztof