This patch adds a supply regulator to the lp855x platform data to facilitate
powering on/off the 3V rail attached to the controller.
Cc: Stéphane Marchesin <marcheu@xxxxxxxxxxxx>
Cc: Aaron Durbin <adurbin@xxxxxxxxxxxx>
Acked-by: Milo Kim <milo.kim@xxxxxx>
Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
---
Changes in v2:
- Add NULL check in lp855x_remove
.../devicetree/bindings/video/backlight/lp855x.txt | 2 ++
drivers/video/backlight/lp855x_bl.c | 18 ++++++++++++++++++
include/linux/platform_data/lp855x.h | 2 ++
3 files changed, 22 insertions(+)
diff --git a/Documentation/devicetree/bindings/video/backlight/lp855x.txt b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
index 96e83a5..0a3ecbc 100644
--- a/Documentation/devicetree/bindings/video/backlight/lp855x.txt
+++ b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
@@ -12,6 +12,7 @@ Optional properties:
- pwm-period: PWM period value. Set only PWM input mode used (u32)
- rom-addr: Register address of ROM area to be updated (u8)
- rom-val: Register value to be updated (u8)
+ - power-supply: Regulator which controls the 3V rail
Example:
@@ -56,6 +57,7 @@ Example:
backlight@2c {
compatible = "ti,lp8557";
reg = <0x2c>;
+ power-supply = <&backlight_vdd>;
dev-ctrl = /bits/ 8 <0x41>;
init-brt = /bits/ 8 <0x0a>;
diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
index 257b3ba..a26d3bb 100644
--- a/drivers/video/backlight/lp855x_bl.c
+++ b/drivers/video/backlight/lp855x_bl.c
@@ -17,6 +17,7 @@
#include <linux/of.h>
#include <linux/platform_data/lp855x.h>
#include <linux/pwm.h>
+#include <linux/regulator/consumer.h>
/* LP8550/1/2/3/6 Registers */
#define LP855X_BRIGHTNESS_CTRL 0x00
@@ -383,6 +384,13 @@ static int lp855x_parse_dt(struct lp855x *lp)
pdata->rom_data = &rom[0];
}
+ pdata->supply = devm_regulator_get(dev, "power");
+ if (IS_ERR(pdata->supply)) {
+ if (PTR_ERR(pdata->supply) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ pdata->supply = NULL;
+ }
+
lp->pdata = pdata;
return 0;
@@ -423,6 +431,14 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
else
lp->mode = REGISTER_BASED;
+ if (lp->pdata->supply) {
+ ret = regulator_enable(lp->pdata->supply);
+ if (ret < 0) {
+ dev_err(&cl->dev, "failed to enable supply: %d\n", ret);
+ return ret;
+ }
+ }
+
i2c_set_clientdata(cl, lp);
ret = lp855x_configure(lp);
@@ -454,6 +470,8 @@ static int lp855x_remove(struct i2c_client *cl)
lp->bl->props.brightness = 0;
backlight_update_status(lp->bl);
+ if (lp->pdata->supply)
+ regulator_disable(lp->pdata->supply);
sysfs_remove_group(&lp->dev->kobj, &lp855x_attr_group);
return 0;
diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h
index 1b2ba24..9c7fd1e 100644
--- a/include/linux/platform_data/lp855x.h
+++ b/include/linux/platform_data/lp855x.h
@@ -136,6 +136,7 @@ struct lp855x_rom_data {
Only valid when mode is PWM_BASED.
* @size_program : total size of lp855x_rom_data
* @rom_data : list of new eeprom/eprom registers
+ * @supply : regulator that supplies 3V input
*/
struct lp855x_platform_data {
const char *name;
@@ -144,6 +145,7 @@ struct lp855x_platform_data {
unsigned int period_ns;
int size_program;
struct lp855x_rom_data *rom_data;
+ struct regulator *supply;
};
#endif
--
2.2.0.rc0.207.ga3a616c
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
