Enable the PMIC GPIO- and RESIN-connected buttons on the board.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 37 ++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index 39597277343c..e23a0406eacc 100644
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -7,6 +7,7 @@
#include <dt-bindings/leds/common.h>
#include "sm4250.dtsi"
+#include "pm6125.dtsi"
/ {
model = "Qualcomm Technologies, Inc. QRB4210 RB2";
@@ -28,6 +29,23 @@ clk40M: can-clk {
};
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ label = "gpio-keys";
+
+ pinctrl-0 = <&kypd_vol_up_n>;
+ pinctrl-names = "default";
+
+ key-volume-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
@@ -219,6 +237,25 @@ &mdss_dsi0_phy {
status = "okay";
};
+&pm6125_gpios {
+ kypd_vol_up_n: kypd-vol-up-n-state {
+ pins = "gpio5";
+ function = "normal";
+ power-source = <0>;
+ bias-pull-up;
+ input-enable;
+ };
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
&qupv3_id_0 {
status = "okay";
};
---
base-commit: 1f6ce8392d6ff486af5ca96df9ded5882c4b6977
change-id: 20230613-topic-rb2_-5dce15c31b46
Best regards,
--
Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
