Hi Andy,
Am Dienstag, den 02.12.2014, 15:42 +0800 schrieb Andy Yan:
> diff --git a/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt b/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt
> new file mode 100644
> index 0000000..107c1ca
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt
> @@ -0,0 +1,40 @@
> +DesignWare HDMI bridge bindings
> +
> +Required properities:
> +- compatible: platform specific such as:
> + * "fsl,imx6q-hdmi"
> + * "fsl,imx6dl-hdmi"
> + * "rockchip,rk3288-dw-hdmi"
I think we should add a common compatible value "snps,dw-hdmi-tx" here:
compatible = "fsl,imx6q-hdmi", "snps,dw-hdmi-tx";
> +- reg: Physical base address and length of the controller's registers.
> +- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
Better make ddc-i2c-bus optional, see the other thread about the ddc i2c
master.
> +- interrupts: The HDMI interrupt number
> +
> +Optional properties
> +- reg-io-width: the width of the reg:1,4, default set to 1 if not present
> +
> +Example:
> + hdmi: hdmi@0120000 {
> + compatible = "fsl,imx6q-hdmi";
> + reg = <0x00120000 0x9000>;
> + interrupts = <0 115 0x04>;
> + gpr = <&gpr>;
> + clocks = <&clks 123>, <&clks 124>;
> + clock-names = "iahb", "isfr";
> + ddc-i2c-bus = <&i2c2>;
> +
> + port@0 {
> + reg = <0>;
> +
> + hdmi_mux_0: endpoint {
> + remote-endpoint = <&ipu1_di0_hdmi>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + hdmi_mux_1: endpoint {
> + remote-endpoint = <&ipu1_di1_hdmi>;
> + };
> + };
> + };
regards
Philipp
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
