Re: [RESEND PATCH v2 2/6] ARM: dts: stm32: add pin map for LTDC on stm32f7

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



hi Dario

On 6/9/23 08:21, Dario Binacchi wrote:
Hi Alexandre,

On Thu, Jun 8, 2023 at 2:42 PM Alexandre TORGUE
<alexandre.torgue@xxxxxxxxxxx> wrote:

Hi Dario

On 6/7/23 08:31, Dario Binacchi wrote:
Add pin configurations for using LTDC (LCD-tft Display Controller) on
stm32f746-disco board.

Signed-off-by: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
---

(no changes since v1)

   arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 35 ++++++++++++++++++++++++++
   1 file changed, 35 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
index 9f65403295ca..f3f90b9bcd61 100644
--- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
@@ -365,6 +365,41 @@ pins2 {
                                       bias-pull-up;
                               };
                       };
+
+
+                     ltdc_pins_a: ltdc-pins-a-0 {

   ltdc-pins-a-0 -->  ltdc-pins-0 is a bit cleaner. I know that I have to
fix sdio pins nodes in this file to keep the same spirit for all group
names.

I have looked at the file arch/arm/boot/dts/stm32f7-pinctrl.dtsi, and
based on the following nodes:
usart1_pins_a: usart1-0
i2c1_pins_b: i2c1-0
can1_pins_a: can1-0

I have decided to rename ltdc-pins-a-0 to ltdc-0.

I hope you agree.

Yes! perfect.

Alex


Thanks and regards,

Dario


If there is no V3 I wil do it directly when I'll apply DT patches if you
agree.

Alex


+                             pins {
+                                     pinmux = <STM32_PINMUX('E', 4, AF14)>, /* LCD_B0 */
+                                              <STM32_PINMUX('G',12, AF9)>,  /* LCD_B4 */
+                                              <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */
+                                              <STM32_PINMUX('I',10, AF14)>, /* LCD_HSYNC */
+                                              <STM32_PINMUX('I',14, AF14)>, /* LCD_CLK */
+                                              <STM32_PINMUX('I',15, AF14)>, /* LCD_R0 */
+                                              <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
+                                              <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
+                                              <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
+                                              <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
+                                              <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
+                                              <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */
+                                              <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
+                                              <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
+                                              <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
+                                              <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
+                                              <STM32_PINMUX('J',10, AF14)>, /* LCD_G3 */
+                                              <STM32_PINMUX('J',11, AF14)>, /* LCD_G4 */
+                                              <STM32_PINMUX('J',13, AF14)>, /* LCD_B1 */
+                                              <STM32_PINMUX('J',14, AF14)>, /* LCD_B2 */
+                                              <STM32_PINMUX('J',15, AF14)>, /* LCD_B3 */
+                                              <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
+                                              <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
+                                              <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
+                                              <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
+                                              <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
+                                              <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */
+                                              <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */
+                                     slew-rate = <2>;
+                             };
+                     };
               };
       };
   };







[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux