Follow the scm.c and move scm-boot files to drivers/soc/qcom. The
guidance is to clean files out from mach-qcom and move to drivers/soc
area.
Signed-off-by: Lina Iyer <lina.iyer@xxxxxxxxxx>
Reviewed-by: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
---
arch/arm/mach-qcom/Makefile | 1 -
arch/arm/mach-qcom/platsmp.c | 2 +-
drivers/soc/qcom/Makefile | 2 +-
{arch/arm/mach-qcom => drivers/soc/qcom}/scm-boot.c | 4 ++--
{arch/arm/mach-qcom => include/soc/qcom}/scm-boot.h | 0
5 files changed, 4 insertions(+), 5 deletions(-)
rename {arch/arm/mach-qcom => drivers/soc/qcom}/scm-boot.c (97%)
rename {arch/arm/mach-qcom => include/soc/qcom}/scm-boot.h (100%)
diff --git a/arch/arm/mach-qcom/Makefile b/arch/arm/mach-qcom/Makefile
index db41e8c..e324375 100644
--- a/arch/arm/mach-qcom/Makefile
+++ b/arch/arm/mach-qcom/Makefile
@@ -1,3 +1,2 @@
obj-y := board.o
obj-$(CONFIG_SMP) += platsmp.o
-obj-$(CONFIG_QCOM_SCM) += scm-boot.o
diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
index d690856..a692bcb 100644
--- a/arch/arm/mach-qcom/platsmp.c
+++ b/arch/arm/mach-qcom/platsmp.c
@@ -20,7 +20,7 @@
#include <asm/smp_plat.h>
-#include "scm-boot.h"
+#include <soc/qcom/scm-boot.h>
#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x35a0
#define SCSS_CPU1CORE_RESET 0x2d80
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index a39446d..70d52ed 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -1,3 +1,3 @@
obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
-obj-$(CONFIG_QCOM_SCM) += scm.o
+obj-$(CONFIG_QCOM_SCM) += scm.o scm-boot.o
diff --git a/arch/arm/mach-qcom/scm-boot.c b/drivers/soc/qcom/scm-boot.c
similarity index 97%
rename from arch/arm/mach-qcom/scm-boot.c
rename to drivers/soc/qcom/scm-boot.c
index 5add20e..60ff7b4 100644
--- a/arch/arm/mach-qcom/scm-boot.c
+++ b/drivers/soc/qcom/scm-boot.c
@@ -17,9 +17,9 @@
#include <linux/module.h>
#include <linux/slab.h>
-#include <soc/qcom/scm.h>
-#include "scm-boot.h"
+#include <soc/qcom/scm.h>
+#include <soc/qcom/scm-boot.h>
/*
* Set the cold/warm boot address for one of the CPU cores.
diff --git a/arch/arm/mach-qcom/scm-boot.h b/include/soc/qcom/scm-boot.h
similarity index 100%
rename from arch/arm/mach-qcom/scm-boot.h
rename to include/soc/qcom/scm-boot.h
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
