Re: [PATCH 2/9] regulator: dt-bindings: mt6358: Drop *_sshub regulators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 09/06/2023 10:29, Chen-Yu Tsai wrote:
The *_sshub regulators are actually alternate configuration interfaces
for their non *_sshub counterparts. They are not separate regulator
outputs. These registers are intended for the companion processor to
use to configure the power rails while the main processor is sleeping.
They are not intended for the main operating system to use.

Since they are not real outputs they shouldn't be modeled separately.
Remove them. Luckily no device tree actually uses them.

Signed-off-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>

Reviewed-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>

---
  .../bindings/regulator/mt6358-regulator.txt   | 22 +++++--------------
  1 file changed, 5 insertions(+), 17 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
index b22b956d1cbe..b6384306db5c 100644
--- a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
@@ -8,14 +8,14 @@ Documentation/devicetree/bindings/regulator/regulator.txt.
The valid names for regulators are::
  BUCK:
-  buck_vdram1, buck_vcore, buck_vcore_sshub, buck_vpa, buck_vproc11,
-  buck_vproc12, buck_vgpu, buck_vs2, buck_vmodem, buck_vs1
+  buck_vdram1, buck_vcore, buck_vpa, buck_vproc11, buck_vproc12, buck_vgpu,
+  buck_vs2, buck_vmodem, buck_vs1
  LDO:
    ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio,
    ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others,
-  ldo_vsram_others_sshub, ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18,
-  ldo_vmch, ldo_vbif28, ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12,
-  ldo_vrf18, ldo_vcn33, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, ldo_vsim2
+  ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vmch, ldo_vbif28,
+  ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vrf18,
+  ldo_vcn33, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, ldo_vsim2
Example: @@ -346,17 +346,5 @@ Example:
  				regulator-max-microvolt = <3100000>;
  				regulator-enable-ramp-delay = <540>;
  			};
-
-			mt6358_vcore_sshub_reg: buck_vcore_sshub {
-				regulator-name = "vcore_sshub";
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <1293750>;
-			};
-
-			mt6358_vsram_others_sshub_reg: ldo_vsram_others_sshub {
-				regulator-name = "vsram_others_sshub";
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <1293750>;
-			};
  		};
  	};



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux