Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../devicetree/bindings/extcon/wlf,arizona.yaml | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
index efdf59abb2e1..351b202d0e10 100644
--- a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
+++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
@@ -23,7 +23,7 @@ properties:
headphone detect mode to HPDETL, ARIZONA_ACCDET_MODE_HPR/2 sets it
to HPDETR. If this node is not included or if the value is unknown,
then headphone detection mode is set to HPDETL.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 2
@@ -51,7 +51,7 @@ properties:
description:
Additional software microphone detection debounce specified in
milliseconds.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
wlf,micd-pol-gpio:
description:
@@ -63,7 +63,7 @@ properties:
description:
Time allowed for MICBIAS to startup prior to performing microphone
detection, specified as per the ARIZONA_MICD_TIME_XXX defines.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 12
@@ -71,7 +71,7 @@ properties:
description:
Delay between successive microphone detection measurements, specified
as per the ARIZONA_MICD_TIME_XXX defines.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 12
@@ -79,7 +79,7 @@ properties:
description:
Microphone detection hardware debounces specified as the number of
measurements to take.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [2, 4]
wlf,micd-timeout-ms:
@@ -97,7 +97,7 @@ properties:
CTIA / OMTP headsets), the field can be of variable length but
should always be a multiple of 3 cells long, each three cell group
represents one polarity configuration.
- $ref: "/schemas/types.yaml#/definitions/uint32-matrix"
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
items:
items:
- description:
@@ -119,7 +119,7 @@ properties:
description:
Settings for the general purpose switch, set as one of the
ARIZONA_GPSW_XXX defines.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3
--
2.34.1
