[PATCH v7 4/4] Documentation: Add documentation for rt5033 multifunction device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




This patch device tree binding documentation for rt5033 multifunction device.

Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Pawel Moll <pawel.moll@xxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Ian campbell <ijc+devicetree@xxxxxxxxxxxxxx>
Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
Signed-off-by: Beomho Seo <beomho.seo@xxxxxxxxxxx>
Acked-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
---
Changes in v7
Changes in v6
Changes in v5
Changes in v4
Changes in v3
- none.

Changes in v2
- Revise binding documentation.
---
 Documentation/devicetree/bindings/mfd/rt5033.txt   |  108 ++++++++++++++++++++
 .../devicetree/bindings/vendor-prefixes.txt        |    1 +
 2 files changed, 109 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/rt5033.txt

diff --git a/Documentation/devicetree/bindings/mfd/rt5033.txt b/Documentation/devicetree/bindings/mfd/rt5033.txt
new file mode 100644
index 0000000..52a6d33
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rt5033.txt
@@ -0,0 +1,108 @@
+Richtek RT5033 Power management Integrated Circuit
+
+RT5033 is a Multifunction device which includes battery charger, fuel gauge,
+flash LED current source, LDO and synchronous Buck converter for portable
+applications. It is interfaced to host controller using i2c interface.
+
+Required properties:
+- compatible : Must be "richtek,rt5033"
+- reg : Specifies the i2c slave address of general part.
+- interrupts : This i2c devices has an IRQ line connected to the main SoC.
+- interrupt-parent : The parent interrupt controller.
+
+Optional node:
+Regulators: The regulators of RT5033 have to be instantiated under sub-node
+named "regulators" usinge the following format.
+
+	regulators {
+		regulator-name {
+			regulator-name = LDO/BUCK
+			regulator subnodes called X, Y and Z
+		};
+	};
+	refer Documentation/devicetree/bindings/regulator/regulator.txt
+
+
+Battery charger: There battery charger of RT5033 have to be instantiated under
+sub-node named "charger" using the following format.
+
+Required properties:
+- compatible : Must be "richtek,rt5033-charger".
+- richtek,pre-uamp : Current of pre-charge mode. The pre-charge current levels
+  are 350 mA to 650 mA programmed by I2C per 100 mA.
+- richtek,pre-threshold-uvolt : Voltage of threshold pre-charge mode. Battery
+  voltage is below pre-charge threshold voltage, the charger is in pre-charge
+  mode with pre-charge current. Its levels are 2.3 V  to 3.8 V programmed
+  by I2C per 0.1 V.
+- richtek,fast-uamp : Current of fast-charge mode. The fast-charge current
+  levels are 700 mA to 2000 mA programmed by I2C per 100 mA.
+- richtek,const-uvolt :  Battery regulation voltage of constant voltage mode.
+  This voltage level 3.65 V to 4.4 V bye I2C per 0.025 V.
+- richtek,eoc-uamp : This property is end of charge current. Its level 150 mA
+  to 200 mA.
+
+	charger {
+		compatible = "richtek,rt5033-charger";
+		richtek,pre-uamp = <350000>;
+		richtek,pre-threshold-uvolt = <3400000>;
+		richtek,fast-uamp = <2000000>;
+		richtek,const-uvolt = <4350000>;
+		richtek,eoc-uamp = <250000>;
+	};
+
+
+Fuelgauge: There fuelgauge of RT5033 to be instantiated node named "fuelgauge"
+using the following format.
+
+Required properties:
+- compatible = Must be "richtek,rt5033-battery".
+
+	i2c_fuel: i2c@1 {
+		compatible = "i2c-gpio";
+		standard i2c-gpio constraints...
+		fuelgauge {
+			compatible = "richtek,rt5033-battery".
+		};
+	};
+
+
+Example:
+
+		rt5033@34 {
+			compatible = "richtek,rt5033";
+			reg = <0x34>;
+			interrupt-parent = <&gpx1>;
+			interrupts = <5 0>;
+
+			regulators {
+				buck_reg: BUCK {
+					regulator-name = "BUCK";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+			};
+
+			charger {
+				compatible = "richtek,rt5033-charger";
+				richtek,pre-uamp = <350000>;
+				richtek,pre-threshold-uvolt = <3400000>;
+				richtek,fast-uamp = <2000000>;
+				richtek,const-uvolt = <4350000>;
+				richtek,eoc-uamp = <250000>;
+			};
+
+		};
+
+		i2c_fuel: i2c@10 {
+			compatible = "i2c-gpio";
+			gpios = <&gpm3 1 0
+				&gpm3 0 0>;
+
+			fuel: rt5033-battery@35 {
+				compatible = "richtek,rt5033-battery";
+				interrupt-parent = <&gpx2>;
+				interrupts = <3 0>;
+				reg = <0x35>;
+			};
+		};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 723999d..611b543 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -124,6 +124,7 @@ ralink	Mediatek/Ralink Technology Corp.
 ramtron	Ramtron International
 realtek Realtek Semiconductor Corp.
 renesas	Renesas Electronics Corporation
+richtek	Richtek Technology Corporation
 ricoh	Ricoh Co. Ltd.
 rockchip	Fuzhou Rockchip Electronics Co., Ltd
 samsung	Samsung Semiconductor
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux