On Wed, Jun 07, 2023 at 09:48:05PM +0530, Krishna chaitanya chundru wrote: > Add the "pcie-mem" interconnect path to the bindings. > > Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx> > --- > Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml > index b3c22eb..6fc5440 100644 > --- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml > +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml > @@ -70,6 +70,13 @@ properties: > description: GPIO used as WAKE# output signal > maxItems: 1 > > + interconnects: > + maxItems: 1 > + > + interconnect-names: > + items: > + - const: pcie-mem > + > resets: > maxItems: 1 > > @@ -97,6 +104,8 @@ required: > - interrupts > - interrupt-names > - reset-gpios > + - interconnects > + - interconnect-names You can't add required properties. That's an ABI break. Up to the platform whether that's acceptible, but you have to explain all this in the commmit msg. > - resets > - reset-names > - power-domains > -- > 2.7.4 >
