Add bindings for Ilitek. The ili9882t touch screen chip same as Elan eKTH6915 controller has a reset gpio. The difference is that ilitek9882 needs to use vccio-supply instead of vcc33-supply. >From Dmitry suggestion, it would make more sense to distinguish the binging of ili9882 and eKTH6915. >From The datasheet specifies there should be 60ms between touch SDA sleep and panel RESX. so we can add the 65 ms delay in i2c_hid_core_suspend. Changes in v4: - PATCH 1/2: Remove compatible items and add reset maxItems. - PATCH 1/2: Refer to the panel description in Doug serias[1]. [1] https://lore.kernel.org/all/20230607144931.v2.1.Id68e30343bb1e11470582a9078b086176cfec46b@changeid/ - PATCH 2/2: Set a "null" to ili9882t_chip_data for vcc33-supply, then using dummy regulator. - Link to v3: https://lore.kernel.org/all/20230607133458.4075667-1-yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/ Changes in v3: - PATCH 1/2: Introduce bindings for Ilitek. - Link to v2: https://lore.kernel.org/all/20230605060524.1178164-1-yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/ Changes in v2: - PATCH 1/2: fix ran make dt_binding_check warnings/errors. - PATCH 1/2: remove oneOf,just enum. - Link to v1: https://lore.kernel.org/all/20230602140948.2138668-1-yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/ Cong Yang (2): dt-bindings: HID: i2c-hid: ilitek: Introduce bindings for Ilitek ili9882t HID: i2c-hid: elan: Add ili9882t timing .../bindings/input/ilitek,ili9882t.yaml | 66 +++++++++++++++++++ drivers/hid/i2c-hid/i2c-hid-of-elan.c | 33 ++++++++-- 2 files changed, 92 insertions(+), 7 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/ilitek,ili9882t.yaml -- 2.25.1
