From: Ryan Lee <ryans.lee@xxxxxxxxxx> Add dt-bindings information for Analog Devices MAX98388 I2S Amplifier Signed-off-by: Ryan Lee <ryans.lee@xxxxxxxxxx> --- .../bindings/sound/adi,max98388.yaml | 79 +++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/adi,max98388.yaml diff --git a/Documentation/devicetree/bindings/sound/adi,max98388.yaml b/Documentation/devicetree/bindings/sound/adi,max98388.yaml new file mode 100644 index 000000000000..fc0ac8d8c3ae --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,max98388.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,max98388.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX98388 Speaker Amplifier + +maintainers: + - Ryan Lee <ryans.lee@xxxxxxxxxx> + +description: + The MAX98388 is a mono Class-D speaker amplifier with I/V feedback. + The device provides a PCM interface for audio data and a standard + I2C interface for control data communication. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - adi,max98388 + reg: + maxItems: 1 + description: I2C address of the device. + + '#sound-dai-cells': + const: 0 + + adi,vmon-slot-no: + description: slot number of the voltage feedback monitor + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 15 + default: 0 + + adi,imon-slot-no: + description: slot number of the current feedback monitor + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 15 + default: 1 + + adi,interleave-mode: + description: + For cases where a single combined channel for the I/V feedback data + is not sufficient, the device can also be configured to share + a single data output channel on alternating frames. + In this configuration, the current and voltage data will be frame + interleaved on a single output channel. + type: boolean + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + - "#sound-dai-cells" + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + max98388: amplifier@39 { + compatible = "adi,max98388"; + reg = <0x39>; + #sound-dai-cells = <0>; + adi,vmon-slot-no = <0>; + adi,imon-slot-no = <1>; + adi,interleave-mode; + reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + }; -- 2.34.1
