The binding expects the first register space to be VDEC_SYS. But on
mt8183, which uses the stateless decoders, this space is used only for
controlling clocks and resets, which are better described as separate
clock-controller and reset-controller nodes.
In fact, in mt8173's devicetree there are already such separate
clock-controller nodes, which cause duplicate addresses between the
vdecsys node and the vcodec node. But for this SoC, since the stateful
decoder code makes other uses of the VDEC_SYS register space, it's not
straightforward to remove it.
In order to avoid the same address conflict to happen on mt8183,
since the only current use of the VDEC_SYS register space in
the driver is to read the status of a clock that indicates the hardware
is active, remove the VDEC_SYS register space from the binding and
describe an extra clock that will be used to directly check the hardware
status.
While adding the active clock, split the mt8183 clocks since there are
less of them than in mt8173. This is done in this same commit to avoid
changing the number of clocks twice.
Also add reg-names to be able to tell that this new register schema is
used, so the driver can keep backward compatibility.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
Changes in v2:
- Merged with patch 1 (media: dt-bindings: mediatek,vcodec: Allow single
clock for mt8183) to avoid changing number of clocks twice
- Added maxItems to reg-names
- Constrained clocks for each compatible
- Reordered properties for each compatible
.../media/mediatek,vcodec-decoder.yaml | 63 ++++++++++++++++---
1 file changed, 54 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
index 63be42560948..2b29748b1d22 100644
--- a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
@@ -21,24 +21,23 @@ properties:
- mediatek,mt8183-vcodec-dec
reg:
+ minItems: 11
maxItems: 12
+ reg-names:
+ minItems: 11
+ maxItems: 11
+
interrupts:
maxItems: 1
clocks:
+ minItems: 2
maxItems: 8
clock-names:
- items:
- - const: vcodecpll
- - const: univpll_d2
- - const: clk_cci400_sel
- - const: vdec_sel
- - const: vdecpll
- - const: vencpll
- - const: venc_lt_sel
- - const: vdec_bus_clk_src
+ minItems: 2
+ maxItems: 8
assigned-clocks: true
@@ -86,6 +85,33 @@ allOf:
required:
- mediatek,scp
+ properties:
+ reg:
+ maxItems: 11
+
+ reg-names:
+ items:
+ - const: misc
+ - const: ld
+ - const: top
+ - const: cm
+ - const: ad
+ - const: av
+ - const: pp
+ - const: hwd
+ - const: hwq
+ - const: hwb
+ - const: hwg
+
+ clocks:
+ minItems: 2
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: vdec
+ - const: active
+
- if:
properties:
compatible:
@@ -97,6 +123,25 @@ allOf:
required:
- mediatek,vpu
+ properties:
+ reg:
+ minItems: 12
+
+ clocks:
+ minItems: 8
+ maxItems: 8
+
+ clock-names:
+ items:
+ - const: vcodecpll
+ - const: univpll_d2
+ - const: clk_cci400_sel
+ - const: vdec_sel
+ - const: vdecpll
+ - const: vencpll
+ - const: venc_lt_sel
+ - const: vdec_bus_clk_src
+
additionalProperties: false
examples:
--
2.41.0
