This patch adds clkc and clkc_pll dts nodes to A1 SoC main dtsi.
The first one clk controller is responsible for all SoC peripherals
clocks excluding audio clocks. The second one clk controller is used by
A1 SoC PLLs. Actually, there are two different APB heads, so we have two
different drivers.
Signed-off-by: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 26 +++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index eed96f262844..a24228808c9c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -6,6 +6,8 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/gpio/meson-a1-gpio.h>
+#include <dt-bindings/clock/amlogic,a1-pll-clkc.h>
+#include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
/ {
compatible = "amlogic,a1";
@@ -126,6 +128,30 @@ uart_AO_B: serial@2000 {
status = "disabled";
};
+ clkc_periphs: clock-controller@800 {
+ compatible = "amlogic,a1-peripherals-clkc";
+ reg = <0 0x800 0 0x104>;
+ #clock-cells = <1>;
+ clocks = <&clkc_pll CLKID_FCLK_DIV2>,
+ <&clkc_pll CLKID_FCLK_DIV3>,
+ <&clkc_pll CLKID_FCLK_DIV5>,
+ <&clkc_pll CLKID_FCLK_DIV7>,
+ <&clkc_pll CLKID_HIFI_PLL>,
+ <&xtal>;
+ clock-names = "fclk_div2", "fclk_div3",
+ "fclk_div5", "fclk_div7",
+ "hifi_pll", "xtal";
+ };
+
+ clkc_pll: pll-clock-controller@7c80 {
+ compatible = "amlogic,a1-pll-clkc";
+ reg = <0 0x7c80 0 0x18c>;
+ #clock-cells = <1>;
+ clocks = <&clkc_periphs CLKID_FIXPLL_IN>,
+ <&clkc_periphs CLKID_HIFIPLL_IN>;
+ clock-names = "fixpll_in", "hifipll_in";
+ };
+
gpio_intc: interrupt-controller@0440 {
compatible = "amlogic,meson-a1-gpio-intc",
"amlogic,meson-gpio-intc";
--
2.36.0
