On Wed, Jun 7, 2023 at 10:16 AM Fabio Estevam <festevam@xxxxxxxxx> wrote:
>
> Hi Tim,
>
> On Wed, Jun 7, 2023 at 2:12 PM Tim Harvey <tharvey@xxxxxxxxxxxxx> wrote:
>
> > +/* bluetooth HCI */
> > +&uart3 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>;
> > + cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
> > + rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
> > + uart-has-rtscts;
>
> 'uart-has-rtscts' means: use native RTS and CTS lines, but you are
> passing 'cts-gpios/rts-gpios',
> which contradicts that.
>
> I suggest you remove 'uart-has-rtscts'.
Fabio,
Yes - will remove for a v2
Thanks,
Tim
