On 07/06/2023 15:34, Cong Yang wrote: > The ili9882t touch screen chip same as Elan eKTH6915 controller > has a reset gpio. The difference is that ili9882t needs to use > vccio-supply instead of vcc33-supply. Doug's series[1] allows panels > and touchscreens to power on/off together, let's add a phandle for this. > > [1]: https: //lore.kernel.org/all/20230523193017.4109557-1-dianders@xxxxxxxxxxxx/ > > Signed-off-by: Cong Yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> > --- > .../bindings/input/ilitek,ili9882t.yaml | 67 +++++++++++++++++++ > 1 file changed, 67 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/ilitek,ili9882t.yaml > > diff --git a/Documentation/devicetree/bindings/input/ilitek,ili9882t.yaml b/Documentation/devicetree/bindings/input/ilitek,ili9882t.yaml > new file mode 100644 > index 000000000000..f69fa3aaf4c5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/ilitek,ili9882t.yaml > @@ -0,0 +1,67 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/input/ilitek,ili9882t.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Ilitek ili9882t touchscreen controller > + > +maintainers: > + - Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> > + > +description: > + Supports the Ilitek ili9882t touchscreen controller. > + This touchscreen controller uses the i2c-hid protocol with a reset GPIO. > + > +properties: > + compatible: > + items: Drop items, just const. > + - const: ilitek,ili9882t > + > + reg: > + const: 0x41 > + > + interrupts: > + maxItems: 1 > + > + panel: > + description: If this is a touchscreen, the panel it's connected to. This > + indicates that the panel and touchscreen are expected to be power > + sequenced together. > + $ref: /schemas/types.yaml#/definitions/phandle "If this is a touchscreen"? Doesn't you description say this is touchscreen controller? Then how this could be also not a touchscreen? > + > + reset-gpios: > + description: Reset GPIO. missing maxItems Best regards, Krzysztof
