On 07/06/2023 08:24, Stanley Chang wrote: > Add the documentation explain the property about Realtek USB PHY driver. > > Realtek DHC (digital home center) RTD SoCs support DWC3 XHCI USB > controller. Added the driver to drive the USB 3.0 PHY transceivers. > > Signed-off-by: Stanley Chang <stanley_chang@xxxxxxxxxxx> > --- > v2 to v3 change: > 1. Broken down into two patches, one for each of USB 2 & 3. > 2. Add more description about Realtek RTD SoCs architecture. > 3. Removed parameter v1 support for simplification. > 4. Revised the compatible name for fallback compatible. > 5. Remove some properties that can be set in the driver. > v1 to v2 change: > Add phy-cells for generic phy driver > --- > .../bindings/phy/realtek,usb3phy.yaml | 156 ++++++++++++++++++ > 1 file changed, 156 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/realtek,usb3phy.yaml > > diff --git a/Documentation/devicetree/bindings/phy/realtek,usb3phy.yaml b/Documentation/devicetree/bindings/phy/realtek,usb3phy.yaml > new file mode 100644 > index 000000000000..b45c398bba5f > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/realtek,usb3phy.yaml > @@ -0,0 +1,156 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright 2023 Realtek Semiconductor Corporation > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/phy/realtek,usb3phy.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Realtek DHC SoCs USB 3.0 PHY > + > +maintainers: > + - Stanley Chang <stanley_chang@xxxxxxxxxxx> > + > +description: > + Realtek USB 3.0 PHY support the digital home center (DHC) RTD series SoCs. > + The USB 3.0 PHY driver is designed to support the XHCI controller. The SoCs > + support multiple XHCI controllers. One PHY device node maps to one XHCI > + controller. > + > + RTD1295/RTD1619 SoCs USB > + The USB architecture includes three XHCI controllers. > + Each XHCI maps to one USB 2.0 PHY and map one USB 3.0 PHY on some > + controllers. > + XHCI controller#0 -- usb2phy -- phy#0 > + |- usb3phy -- phy#0 > + XHCI controller#1 -- usb2phy -- phy#0 > + XHCI controller#2 -- usb2phy -- phy#0 > + |- usb3phy -- phy#0 > + > + RTD1395 SoCs USB > + The USB architecture includes two XHCI controllers. > + The controller#0 has one USB 2.0 PHY. The controller#1 includes two USB 2.0 > + PHY. > + XHCI controller#0 -- usb2phy -- phy#0 > + XHCI controller#1 -- usb2phy -- phy#0 > + |- phy#1 Skip unrelated devices. > + > + RTD1319/RTD1619b SoCs USB > + The USB architecture includes three XHCI controllers. > + Each XHCI maps to one USB 2.0 PHY and map one USB 3.0 PHY on controllers#2. > + XHCI controller#0 -- usb2phy -- phy#0 > + XHCI controller#1 -- usb2phy -- phy#0 > + XHCI controller#2 -- usb2phy -- phy#0 > + |- usb3phy -- phy#0 > + > + RTD1319d SoCs USB > + The USB architecture includes three XHCI controllers. > + Each xhci maps to one USB 2.0 PHY and map one USB 3.0 PHY on controllers#0. > + XHCI controller#0 -- usb2phy -- phy#0 > + |- usb3phy -- phy#0 > + XHCI controller#1 -- usb2phy -- phy#0 > + XHCI controller#2 -- usb2phy -- phy#0 > + > + RTD1312c/RTD1315e SoCs USB > + The USB architecture includes three XHCI controllers. > + Each XHCI maps to one USB 2.0 PHY. > + XHCI controller#0 -- usb2phy -- phy#0 > + XHCI controller#1 -- usb2phy -- phy#0 > + XHCI controller#2 -- usb2phy -- phy#0 > + > +properties: > + compatible: > + items: > + - enum: > + - realtek,rtd1295-usb3phy > + - realtek,rtd1619-usb3phy > + - realtek,rtd1319-usb3phy > + - realtek,rtd1619b-usb3phy > + - realtek,rtd1319d-usb3phy Same comments as for previous patch. > + - const: realtek,usb3phy > + > + reg: > + description: PHY data registers > + maxItems: 1 > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > + "#phy-cells": > + const: 0 1 phy or 4? Decide. > + > +patternProperties: > + "^phy@[0-3]+$": > + description: Each sub-node is a PHY device for one XHCI controller. > + type: object > + properties: > + realtek,param: > + description: The data of PHY parameter are the pair of the > + offset and value. > + $ref: /schemas/types.yaml#/definitions/uint8-array Your choice of types is surprising. If this is array, than maxItems (and please don't tell me it is maxItems: 1). Anyway, why 8 bits long? > + > + realtek,do-toggle: > + description: Set this flag to enable the PHY parameter toggle > + when port status change. > + type: boolean > + > + realtek,do-toggle-once: > + description: Set this flag to do PHY parameter toggle only on > + PHY init. > + type: boolean > + > + realtek,check-efuse: > + description: Enable to update PHY parameter from reading otp table. > + type: boolean > + > + realtek,use-default-parameter: > + description: Don't set parameter and use default value in hardware. > + type: boolean > + > + realtek,check-rx-front-end-offset: > + description: Enable to check rx front end offset. > + type: boolean > + > +required: > + - compatible > + - reg > + - "#address-cells" > + - "#size-cells" > + - "#phy-cells" > + > +additionalProperties: false > + > +examples: > + - | > + usb_port2_usb3phy: usb-phy@13e10 { > + compatible = "realtek,rtd1319d-usb3phy", "realtek,usb3phy"; > + reg = <0x13e10 0x4>; > + #address-cells = <1>; > + #size-cells = <0>; > + #phy-cells = <0>; > + > + phy@0 { > + reg = <0>; > + realtek,param = > + <0x01 0xac8c>, > + <0x06 0x0017>, First, this is matrix, not uint8 array. Second, 0xac8c is past 16 bits long, not 8. Third, you put some magic register programming to DT. Please don't. Drop all this from DT. Best regards, Krzysztof
