Hello, This patch series adds support for the Nuvoton NCT7362 fan/GPIO controller. The chip provides 16 pins that can be individually configured for PWM, tach, or GPIO functionality, and is controlled via an I2C interface. There is a sibling NCT7360 chip covered by the same datasheet that's very similar but only provides 8 fan/tach/gpio pins instead of 16; it could be supported fairly easily with minor adjustments to the same driver, but since I don't have an instance of it to test against I've only implemented support for the NCT7362. The first patch adds a DT binding, and the second adds a hwmon driver with optional GPIO support enabled via CONFIG_SENSORS_NCT7362_GPIO. Thanks, Zev Zev Weiss (2): dt-bindings: hwmon: Add Nuvoton NCT7362Y binding hwmon: (nct7362) Add nct7362 driver .../bindings/hwmon/nuvoton,nct7362.yaml | 123 ++++ MAINTAINERS | 7 + drivers/hwmon/Kconfig | 18 + drivers/hwmon/Makefile | 1 + drivers/hwmon/nct7362.c | 697 ++++++++++++++++++ 5 files changed, 846 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/nuvoton,nct7362.yaml create mode 100644 drivers/hwmon/nct7362.c -- 2.40.0.5.gf6e3b97ba6d2.dirty
