Add device tree and bindings for the TP-Link HC220 G5 v1 wireless AP, a consumer product from TP-Link based on MT7621. Changes since v3: - Turns out that adding sub-nodes to the pcie invites more warnings from dtbs_check so we're dropping those - Running dtbs_check made me realise that I need to re-order the patches so that the bindings are introduced first. Hence the major change in v4 is the re-ordering of patches - Renamed the LEDs nodes to match the schema. Changes since v2: - Remove WIP nodes for NAND flash that accidentally got included in v2 - Fix commit message with the actual 5GHz WiFi chip name - Remove gmac and mdio nodes from device tree as defaults are sufficient - Added sub-nodes under pcie for each of the WiFi chip with appropriate compatible string. - Collect Acks received for the device tree bindings patch Changes since v1: - Changed compatible for the board to "tplink,hc220-g5-v1" - Updated the DSA switch nodes to better reflect actual usage. - Disabled the fixed-link in gmac1 - Added device tree bindings in Documentation/ v3: https://lore.kernel.org/linux-mips/20230605150114.601102-1-liviu@xxxxxxxxxxx/ v2: https://lore.kernel.org/linux-mips/20230529150833.526084-1-liviu@xxxxxxxxxxx/ v1: https://lore.kernel.org/linux-mips/20230509200125.309026-1-liviu@xxxxxxxxxxx/ Liviu Dudau (2): dt-bindings: mips: Add bindings for TP-Link HC220 G5 v1 board mips: dts: ralink: Add support for TP-Link HC220 G5 v1 board .../devicetree/bindings/mips/ralink.yaml | 1 + arch/mips/boot/dts/ralink/Makefile | 3 +- .../dts/ralink/mt7621-tplink-hc220-g5-v1.dts | 84 +++++++++++++++++++ 3 files changed, 87 insertions(+), 1 deletion(-) create mode 100644 arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dts -- 2.40.1
