When referring to array of phandles, using <> to separate the array entries is better notation as it makes potential errors with phandle and cell arguments easier to catch. Fix the outliers to be consistent with the rest of the usage. Cc: Jan Kiszka <jan.kiszka@xxxxxxxxxxx> Reviewed-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx> Signed-off-by: Nishanth Menon <nm@xxxxxx> --- Changes from V1 * no change other than picking up Reviewed-by V1: https://lore.kernel.org/r/20230601152636.858553-11-nm@xxxxxx .../boot/dts/ti/k3-am65-iot2050-common.dtsi | 17 ++++++++--------- .../dts/ti/k3-am6548-iot2050-advanced-m2.dts | 18 ++++++++---------- 2 files changed, 16 insertions(+), 19 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi index 96ac2b476b11..ac5460bd0c52 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi @@ -385,13 +385,12 @@ &main_gpio0 { &wkup_gpio0 { pinctrl-names = "default"; - pinctrl-0 = < - &arduino_io_d2_to_d3_pins_default - &arduino_i2c_aio_switch_pins_default - &arduino_io_oe_pins_default - &push_button_pins_default - &db9_com_mode_pins_default - >; + pinctrl-0 = + <&arduino_io_d2_to_d3_pins_default>, + <&arduino_i2c_aio_switch_pins_default>, + <&arduino_io_oe_pins_default>, + <&push_button_pins_default>, + <&db9_com_mode_pins_default>; gpio-line-names = /* 0..9 */ "wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0", @@ -712,11 +711,11 @@ mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { &mcu_r5fss0_core0 { memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; }; &mcu_r5fss0_core1 { memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; - mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts index 9400e35882a6..9209b5a7baa4 100644 --- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts @@ -66,20 +66,18 @@ AM65X_IOPAD(0x001c, PIN_INPUT_PULLUP, 7) /* (C23) GPIO1_89 */ &main_gpio0 { pinctrl-names = "default"; - pinctrl-0 = < - &main_m2_pcie_mux_control - &arduino_io_d4_to_d9_pins_default - >; + pinctrl-0 = + <&main_m2_pcie_mux_control>, + <&arduino_io_d4_to_d9_pins_default>; }; &main_gpio1 { pinctrl-names = "default"; - pinctrl-0 = < - &main_m2_enable_pins_default - &main_pmx0_m2_config_pins_default - &main_pmx1_m2_config_pins_default - &cp2102n_reset_pin_default - >; + pinctrl-0 = + <&main_m2_enable_pins_default>, + <&main_pmx0_m2_config_pins_default>, + <&main_pmx1_m2_config_pins_default>, + <&cp2102n_reset_pin_default>; }; /* -- 2.40.0
