Re: [PATCH v3 2/3] media: dt-bindings: alvium: add document YAML binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hey Laurent, Tommaso,

On Tue, Jun 06, 2023 at 07:36:56PM +0300, Laurent Pinchart wrote:
> On Tue, Jun 06, 2023 at 05:54:03PM +0200, Tommaso Merciai wrote:

> > +  alliedvision,lp2hs-delay-us:
> > +    maxItems: 1
> > +    description:
> > +      Low power to high speed delay time in microseconds.
> 
> You can drop "in microseconds", that's implied by the suffix.
> 
> > +      The purpose of this property is force a DPhy reset for the period
> > +      described by the microseconds on the property, before it starts
> > +      streaming. To be clear, with that value bigger than 0 the Alvium
> > +      forces a dphy-reset on all lanes for that period. That means all
> > +      lanes go up into low power state. This may help a csi2 rx ip to
> > +      reset if that IP can't deal with a continous clock.
> 
> I'd like to propose what I think is a clearer version:
> 
>     description: |
>       Low power to high speed delay time.
> 
>       If the value is larger than 0, the camera forces a reset of all
>       D-PHY lanes for the duration specified by this property. All lanes
>       will transition to the low-power state and back to the high-speed
>       state after the delay. Otherwise the lanes will transition to and
>       remain in the high-speed state immediately after power on.
> 
>       This is meant to help CSI-2 receivers synchronizing their D-PHY
>       RX.

Question about the property.
Why not make it have a minimum value of 1 and drop the special-case
behaviour for zero?

Cheers,
Conor.

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux