On Tue, Jun 6, 2023 at 12:01 PM Geert Uytterhoeven
<geert+renesas@xxxxxxxxx> wrote:
>
> Fix misspellings of "circuit".
>
> Fixes: c7239a3da1628767 ("dt-bindings: gpio: Add gpio-delay binding document")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> ---
> Documentation/devicetree/bindings/gpio/gpio-delay.yaml | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-delay.yaml b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml
> index 7c16a4e1a768ef72..1cebc4058e272660 100644
> --- a/Documentation/devicetree/bindings/gpio/gpio-delay.yaml
> +++ b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml
> @@ -11,7 +11,7 @@ maintainers:
>
> description: |
> This binding describes an electrical setup where setting an GPIO output
> - is delayed by some external setup, e.g. RC curcuit.
> + is delayed by some external setup, e.g. RC circuit.
>
> +----------+ +-----------+
> | | VCC_B | |
> @@ -30,7 +30,7 @@ description: |
> GND
>
> If the input on the consumer is controlled by an open-drain signal
> - attached to an RC curcuit the ramp-up delay is not under control
> + attached to an RC circuit the ramp-up delay is not under control
> of the GPIO controller.
>
> properties:
> --
> 2.34.1
>
Applied, thanks!
Bart
