Add the operating-points-v2 to support cpu scaling on StarFive JH7110 SoC. It supports up to 4 cpu frequency loads. Signed-off-by: Mason Huo <mason.huo@xxxxxxxxxxxxxxxx> --- .../jh7110-starfive-visionfive-2.dtsi | 16 +++++++++ arch/riscv/boot/dts/starfive/jh7110.dtsi | 33 +++++++++++++++++++ 2 files changed, 49 insertions(+) diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi index 9714da5550d7..fa0061eb33a7 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -230,3 +230,19 @@ &uart0 { pinctrl-0 = <&uart0_pins>; status = "okay"; }; + +&U74_1 { + cpu-supply = <&vdd_cpu>; +}; + +&U74_2 { + cpu-supply = <&vdd_cpu>; +}; + +&U74_3 { + cpu-supply = <&vdd_cpu>; +}; + +&U74_4 { + cpu-supply = <&vdd_cpu>; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi index 4c5fdb905da8..7eef88d2cedb 100644 --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -53,6 +53,9 @@ U74_1: cpu@1 { next-level-cache = <&ccache>; riscv,isa = "rv64imafdc_zba_zbb"; tlb-split; + operating-points-v2 = <&cpu_opp>; + clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>; + clock-names = "cpu"; cpu1_intc: interrupt-controller { compatible = "riscv,cpu-intc"; @@ -79,6 +82,9 @@ U74_2: cpu@2 { next-level-cache = <&ccache>; riscv,isa = "rv64imafdc_zba_zbb"; tlb-split; + operating-points-v2 = <&cpu_opp>; + clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>; + clock-names = "cpu"; cpu2_intc: interrupt-controller { compatible = "riscv,cpu-intc"; @@ -105,6 +111,9 @@ U74_3: cpu@3 { next-level-cache = <&ccache>; riscv,isa = "rv64imafdc_zba_zbb"; tlb-split; + operating-points-v2 = <&cpu_opp>; + clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>; + clock-names = "cpu"; cpu3_intc: interrupt-controller { compatible = "riscv,cpu-intc"; @@ -131,6 +140,9 @@ U74_4: cpu@4 { next-level-cache = <&ccache>; riscv,isa = "rv64imafdc_zba_zbb"; tlb-split; + operating-points-v2 = <&cpu_opp>; + clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>; + clock-names = "cpu"; cpu4_intc: interrupt-controller { compatible = "riscv,cpu-intc"; @@ -164,6 +176,27 @@ core4 { }; }; + cpu_opp: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + opp-microvolt = <800000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <800000>; + }; + opp-750000000 { + opp-hz = /bits/ 64 <750000000>; + opp-microvolt = <800000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1040000>; + }; + }; + gmac0_rgmii_rxin: gmac0-rgmii-rxin-clock { compatible = "fixed-clock"; clock-output-names = "gmac0_rgmii_rxin"; -- 2.39.2